RT1206FRE0768RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE0768RL is a 68 Ohm ±1% thin film chip resistor in 1206 (3216 Metric) package rated for 0.25W (1/4W) power dissipation. Manufactured by YAGEO, this component is actively produced and widely used in general-purpose electronic applications. Finding equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and optimize cost-performance trade-offs across different manufacturing sources and tolerance specifications.

Substiute Parts

RT1206FRE0768RL

YAGEOIn Stock: 2544RT1206FRE0768RL Datasheet

Current PartRFQ

RT1206BRD0768RL

YAGEOIn Stock: 4516RT1206BRD0768RL Datasheet

UpgradeRFQ

ERA-8AEB680V

Panasonic Electronic ComponentsIn Stock: 5766ERA-8AEB680V Datasheet

UpgradeRFQ

RG3216P-68R0-D-T5

SusumuIn Stock: 5783RG3216P-68R0-D-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE0768RL is determined by the following critical parameters:

• Resistance Value: Must be 68 Ohms (exact match required)
• Package Type: Must be 1206 (3216 Metric) for PCB footprint compatibility
• Power Rating: Must be 0.25W (1/4W) or higher
• Composition: Thin film technology ensures consistent performance characteristics
• Operating Temperature Range: Must cover -55°C to 155°C minimum
• Compliance: RoHS3 and REACH compliance required for regulatory alignment

Substitute parts may differ in tolerance specification (±0.1% to ±0.5%), temperature coefficient (±25ppm/°C to ±50ppm/°C), and additional features (automotive AEC-Q200 certification, anti-sulfur coating). These variations do not prevent substitution when the core electrical and mechanical parameters remain compatible.

Parameter Comparison

Engineering Selection Recommendations

RT1206BRD0768RL (YAGEO): Direct upgrade from the main part within the same manufacturer series. Offers improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C) while maintaining identical package, power rating, and compliance status. Suitable for applications requiring tighter resistance tolerance without introducing multi-source supply chain complexity.

ERA-8AEB680V (Panasonic Electronic Components): Automotive-grade substitute with AEC-Q200 certification. Matches tolerance and temperature coefficient of RT1206BRD0768RL while adding automotive qualification. Appropriate for automotive and harsh-environment applications where AEC-Q200 compliance is specified or preferred.

RG3216P-68R0-D-T5 (Susumu): Automotive-grade substitute with AEC-Q200 certification and anti-sulfur coating. Tolerance specification (±0.5%) is broader than the main part but remains within acceptable range for most applications. Temperature coefficient matches other substitutes at ±25ppm/°C. Suitable for automotive applications requiring anti-sulfur protection in corrosive environments.

All substitute parts maintain active product status and full regulatory compliance (RoHS3, REACH). Selection should be based on application requirements for tolerance precision, automotive qualification, and environmental protection features.

Frequently Asked Questions (FAQ)

Q: Can RT1206BRD0768RL replace RT1206FRE0768RL directly?

A: Yes. Both parts share identical resistance value (68 Ohms), package (1206), power rating (0.25W), and operating temperature range (-55°C to 155°C). RT1206BRD0768RL provides superior tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C), making it a direct upgrade with no design modifications required.

Q: What is the difference between automotive-grade substitutes and standard parts?

A: ERA-8AEB680V and RG3216P-68R0-D-T5 carry AEC-Q200 automotive qualification, indicating compliance with automotive reliability and environmental stress testing standards. These parts are suitable for automotive applications where such certification is required. Standard parts (RT1206FRE0768RL, RT1206BRD0768RL) are suitable for general-purpose applications without automotive qualification requirements.

Q: Does the anti-sulfur coating on RG3216P-68R0-D-T5 affect electrical performance?

A: Anti-sulfur coating is a protective feature that prevents sulfur-induced corrosion in high-sulfur environments. It does not alter the electrical specifications (resistance, tolerance, temperature coefficient, power rating) of the component. Selection of this feature depends on environmental exposure conditions, not electrical performance requirements.

Q: Are all substitute parts available in the same packaging format?

A: Yes. All listed substitutes are supplied in Tape & Reel (TR) packaging, matching the main part's packaging format. Physical dimensions vary slightly (height ranges from 0.020" to 0.028"), but all parts fit the 1206 (3216 Metric) footprint and are compatible with standard SMD assembly equipment.

Q: Which substitute should be selected for cost optimization?

A: Selection based on cost should consider application tolerance requirements. RT1206FRE0768RL (±1% tolerance) is the baseline. RG3216P-68R0-D-T5 (±0.5% tolerance) offers a middle-ground option. RT1206BRD0768RL and ERA-8AEB680V (±0.1% tolerance) provide precision at higher cost. Choose the substitute with the loosest acceptable tolerance for your application to optimize cost.

Q: Can these parts be used interchangeably in existing designs?

A: Yes, provided the design specifications allow for the tolerance and temperature coefficient variations. Designs with tight tolerance requirements (±0.1%) should use RT1206BRD0768RL, ERA-8AEB680V, or RG3216P-68R0-D-T5. Designs with standard tolerance requirements (±1% or ±0.5%) can use any listed part. No PCB layout or schematic modifications are required due to identical package compatibility.