RT1206FRE0759KL Equivalent & Substitute Parts

Part Overview

The RT1206FRE0759KL is a 59 kOhms ±1% thin film chip resistor in 1206 (3216 Metric) package format, rated for 0.25W (1/4W) power dissipation. Manufactured by YAGEO under the RT series, this component is actively produced and ROHS3 compliant. Substitute parts are identified to provide alternatives with enhanced specifications or improved availability while maintaining core electrical and mechanical compatibility.

Substiute Parts

RT1206FRE0759KL

YAGEOIn Stock: 813RT1206FRE0759KL Datasheet

Current PartRFQ

ERA-8AEB5902V

Panasonic Electronic ComponentsIn Stock: 3137ERA-8AEB5902V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE0759KL is determined by the following mandatory parameters:

• Resistance value: 59 kOhms (exact match required)
• Package / Case: 1206 (3216 Metric) (exact match required)
• Power rating: 0.25W minimum (equal or higher acceptable)
• Composition: Thin Film (exact match required)
• Operating temperature range: -55°C ~ 155°C minimum (equal or wider acceptable)
• RoHS compliance: ROHS3 Compliant (required)

The ERA-8AEB5902V qualifies as a substitute based on these criteria. Enhanced specifications such as improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C) represent upgrades that do not compromise compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206FRE0759KL and ERA-8AEB5902V are active products with ROHS3 compliance and identical moisture sensitivity ratings. The ERA-8AEB5902V provides enhanced tolerance specification (±0.1% vs ±1%) and improved temperature coefficient stability (±25ppm/°C vs ±50ppm/°C), making it suitable for applications requiring tighter component accuracy. The ERA-8AEB5902V carries AEC-Q200 automotive qualification, which may be relevant for automotive or high-reliability applications. Physical dimensions show minor variations within the 1206 package specification, with the ERA-8AEB5902V measuring slightly larger in length (3.20mm vs 3.10mm) and height (0.70mm vs 0.65mm), which should be verified against PCB layout constraints.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB5902V be used as a direct replacement for RT1206FRE0759KL?

A: Yes. Both components share identical resistance value (59 kOhms), power rating (0.25W), package format (1206), composition (thin film), and operating temperature range (-55°C ~ 155°C). The ERA-8AEB5902V offers improved tolerance and temperature coefficient specifications.

Q: What are the physical compatibility considerations?

A: Both parts use the 1206 (3216 Metric) package. The ERA-8AEB5902V has slightly larger dimensions (3.20mm L x 1.60mm W vs 3.10mm L x 1.60mm W) and greater seated height (0.70mm vs 0.65mm). Verify PCB layout and component placement clearances before substitution.

Q: Does the improved tolerance of ERA-8AEB5902V affect circuit performance?

A: The ERA-8AEB5902V tolerance of ±0.1% is tighter than the RT1206FRE0759KL tolerance of ±1%. This represents an upgrade that reduces component value variation and may improve circuit accuracy in precision applications. No negative performance impact results from this specification improvement.

Q: Are both parts RoHS compliant?

A: Yes. Both RT1206FRE0759KL and ERA-8AEB5902V are ROHS3 compliant with moisture sensitivity level 1 (unlimited).

Q: What is the significance of AEC-Q200 qualification on the ERA-8AEB5902V?

A: AEC-Q200 is an automotive industry qualification standard. The ERA-8AEB5902V carries this certification, indicating suitability for automotive applications. This qualification is not a requirement for general-purpose substitution but may be relevant for specific application requirements.