RT1206FRE07576RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07576RL is a 576 Ohm ±1% thin film chip resistor manufactured by YAGEO in the 1206 (3216 Metric) package format. This surface mount device is rated for 0.25W (1/4W) power dissipation and operates across the temperature range of -55°C to 155°C. The component is ROHS3 compliant with MSL Level 1 rating, indicating unlimited moisture sensitivity protection. As an active product with 775 pieces in stock, substitute parts may be required for design optimization, supply chain flexibility, or performance enhancement in specific applications.

Substiute Parts

RT1206FRE07576RL

YAGEOIn Stock: 828RT1206FRE07576RL Datasheet

Current PartRFQ

ERA-8AEB5760V

Panasonic Electronic ComponentsIn Stock: 4819ERA-8AEB5760V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The ERA-8AEB5760V from Panasonic Electronic Components qualifies as a direct substitute based on the following critical parameters:

• Resistance Value: Both parts provide 576 Ohms nominal resistance
• Package Format: Both use 1206 (3216 Metric) surface mount package
• Power Rating: Both rated at 0.25W (1/4W)
• Composition: Both are thin film resistors
• Operating Temperature Range: Both operate from -55°C to 155°C
• Compliance: Both are ROHS3 compliant with MSL Level 1 rating

The ERA-8AEB5760V offers enhanced tolerance (±0.1% versus ±1%) and improved temperature coefficient (±25ppm/°C versus ±50ppm/°C), with AEC-Q200 automotive qualification. Physical dimensions show minor variations within acceptable tolerances for 1206 package specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206FRE07576RL and ERA-8AEB5760V are active products with full regulatory compliance. The ERA-8AEB5760V provides superior tolerance and temperature stability characteristics, making it suitable for applications requiring tighter resistance accuracy. The Panasonic component carries AEC-Q200 automotive qualification, which may be required for automotive or high-reliability applications. Selection between these parts should be based on application-specific tolerance requirements and any automotive qualification mandates.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB5760V replace RT1206FRE07576RL in existing designs? A: Yes. Both parts share identical resistance values, power ratings, package formats, and operating temperature ranges. The ERA-8AEB5760V is a direct mechanical and electrical substitute.

Q: What are the key differences between these parts? A: The primary differences are tolerance specification (±0.1% versus ±1%), temperature coefficient (±25ppm/°C versus ±50ppm/°C), and automotive qualification (AEC-Q200 for Panasonic only). Functionally, both deliver 576 Ohms at 0.25W in a 1206 package.

Q: Are there any physical dimension concerns when substituting? A: Both parts conform to 1206 (3216 Metric) package specifications. Minor dimensional variations (length 3.10mm versus 3.20mm, height 0.65mm versus 0.70mm) fall within standard package tolerances and do not affect PCB layout compatibility.

Q: Which part should be selected for automotive applications? A: The ERA-8AEB5760V carries AEC-Q200 automotive qualification and should be selected for automotive or high-reliability applications where this certification is required.

Q: Do both parts have the same moisture sensitivity rating? A: Yes. Both parts are rated MSL Level 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.