RT1206FRE0756RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE0756RL is a 56 Ohm ±1% thin film chip resistor in 1206 (3216 Metric) package format, rated for 0.25W (1/4W) power dissipation. This component is manufactured by YAGEO and maintains Active product status with full ROHS3 compliance. Substitute parts are identified to provide alternatives with improved tolerance specifications or enhanced automotive qualification where application requirements demand higher precision or reliability standards.

Substiute Parts

RT1206FRE0756RL

YAGEOIn Stock: 4520RT1206FRE0756RL Datasheet

Current PartRFQ

RT1206BRD0756RL

YAGEOIn Stock: 3596RT1206BRD0756RL Datasheet

UpgradeRFQ

ERA-8AEB560V

Panasonic Electronic ComponentsIn Stock: 5760ERA-8AEB560V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE0756RL is determined by the following mandatory parameters:

• Resistance value: 56 Ohms (exact match required)
• Package / Case: 1206 (3216 Metric) (exact match required)
• Power rating: 0.25W minimum
• Composition: Thin Film
• Operating temperature range: -55°C ~ 155°C minimum coverage
• RoHS3 compliance

Identified substitutes meet or exceed these core requirements. Tolerance and temperature coefficient specifications may vary as permitted improvements within the electrical and mechanical constraints of this product category.

Parameter Comparison

Engineering Selection Recommendations

RT1206BRD0756RL serves as a direct upgrade path within the YAGEO RT series, offering improved tolerance specification (±0.1% versus ±1%) and reduced temperature coefficient (±25ppm/°C versus ±50ppm/°C) while maintaining identical package dimensions and thermal characteristics. This substitute is suitable for applications requiring tighter resistance tolerances without introducing mechanical or thermal constraints.

ERA-8AEB560V provides equivalent electrical performance with additional automotive AEC-Q200 qualification. Physical dimensions show minor variation (0.126" L versus 0.122" L and 0.028" height versus 0.026" height), requiring PCB layout verification for space-constrained applications. This substitute is appropriate for automotive or high-reliability applications where AEC-Q200 certification is specified or preferred.

All three parts maintain Active product status, ROHS3 compliance, and unlimited moisture sensitivity rating (MSL 1), ensuring compatibility with standard manufacturing and storage protocols.

Frequently Asked Questions (FAQ)

Q: Can RT1206BRD0756RL replace RT1206FRE0756RL in any application?

A: Yes. RT1206BRD0756RL is electrically and mechanically compatible. It provides improved tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C). Physical dimensions are identical, requiring no PCB layout modifications.

Q: What are the physical dimension differences between ERA-8AEB560V and the original part?

A: ERA-8AEB560V has slightly larger dimensions: length 0.126" (3.20mm) versus 0.122" (3.10mm), and height 0.028" (0.70mm) versus 0.026" (0.65mm). Width remains 0.063" (1.60mm). Verify PCB footprint clearance before substitution in space-constrained designs.

Q: When should ERA-8AEB560V be selected over RT1206BRD0756RL?

A: Select ERA-8AEB560V when automotive AEC-Q200 qualification is required or specified. Both parts offer ±0.1% tolerance and ±25ppm/°C temperature coefficient. The primary differentiator is automotive certification and manufacturer (Panasonic versus YAGEO).

Q: Are all three parts suitable for high-temperature applications?

A: Yes. All three parts operate across -55°C ~ 155°C. Temperature coefficient specifications (±50ppm/°C for RT1206FRE0756RL, ±25ppm/°C for RT1206BRD0756RL and ERA-8AEB560V) define resistance variation within this range.

Q: Do packaging and moisture sensitivity differ among these parts?

A: All three parts are supplied in Tape & Reel (TR) packaging with MSL 1 (Unlimited) moisture sensitivity rating. No special storage or handling requirements differentiate these components.