Equivalent & Substitute Parts for RT1206FRE07562KL

Part Overview

The RT1206FRE07562KL is a 562 kOhms ±1% thin film chip resistor in 1206 package format, rated at 0.25W (1/4W) power dissipation. Manufactured by YAGEO, this component is actively produced and ROHS3 compliant. Alternative parts may be required due to inventory constraints, tolerance requirements, or application-specific certifications such as automotive qualification.

Substiute Parts

RT1206FRE07562KL

YAGEOIn Stock: 1150RT1206FRE07562KL Datasheet

Current PartRFQ

RT1206BRE07562KL

YAGEOIn Stock: 14520RT1206BRE07562KL Datasheet

UpgradeRFQ

ERA-8AEB5623V

Panasonic Electronic ComponentsIn Stock: 9663ERA-8AEB5623V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE07562KL is determined by the following criteria:

• Identical resistance value: 562 kOhms
• Equal or tighter tolerance: ±1% or better
• Identical or superior power rating: 0.25W minimum
• Identical package format: 1206 (3216 Metric)
• Thin film composition
• Operating temperature range: -55°C to 155°C minimum
• ROHS3 compliance
• MSL 1 rating

Two substitute parts meet these criteria with enhanced specifications or additional certifications.

Parameter Comparison

Engineering Selection Recommendations

RT1206BRE07562KL serves as a direct upgrade within the YAGEO RT series, offering tighter tolerance (±0.1% versus ±1%) while maintaining identical electrical and thermal specifications. Both parts are actively produced with equivalent compliance certifications.

ERA-8AEB5623V provides an alternative from Panasonic with AEC-Q200 automotive qualification and superior temperature coefficient performance (±25ppm/°C versus ±50ppm/°C). This part is suitable for applications requiring automotive-grade reliability. Physical dimensions vary slightly (3.20mm × 1.60mm versus 3.10mm × 1.60mm length), with maximum seated height of 0.70mm versus 0.65mm.

Selection between these substitutes depends on application requirements: tolerance precision, automotive qualification necessity, and physical space constraints within the assembly.

Frequently Asked Questions (FAQ)

Q: Can RT1206BRE07562KL replace RT1206FRE07562KL in any application?

A: Yes. RT1206BRE07562KL meets all electrical and mechanical requirements of the original part with enhanced tolerance specification. No design modifications are required.

Q: Is ERA-8AEB5623V suitable for non-automotive applications?

A: Yes. AEC-Q200 certification indicates automotive-grade reliability and does not restrict use in general industrial or consumer applications. The superior temperature coefficient (±25ppm/°C) provides additional performance margin.

Q: Are there physical compatibility concerns with ERA-8AEB5623V?

A: ERA-8AEB5623V has slightly larger dimensions (3.20mm length and 0.70mm maximum height versus 3.10mm and 0.65mm). Verify PCB layout clearances before substitution in space-constrained designs.

Q: Do all three parts share identical moisture sensitivity ratings?

A: Yes. All three parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity precautions are required during storage or handling.

Q: What compliance certifications apply to all substitute options?

A: All three parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with identical HTSUS code 8533.21.0030.