RT1206FRE07475RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07475RL is a 475 Ohm ±1% thin film chip resistor in 1206 (3216 Metric) package rated for 0.25W power dissipation. This YAGEO component operates across -55°C to 155°C and is ROHS3 compliant with MSL 1 rating. The part is currently active in production with 717 pieces in stock. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required, particularly when tighter tolerance specifications or automotive-grade certifications become necessary for application requirements.

Substiute Parts

RT1206FRE07475RL

YAGEOIn Stock: 735RT1206FRE07475RL Datasheet

Current PartRFQ

RT1206BRD07475RL

YAGEOIn Stock: 6769RT1206BRD07475RL Datasheet

UpgradeRFQ

ERA-8AEB4750V

Panasonic Electronic ComponentsIn Stock: 5129ERA-8AEB4750V Datasheet

UpgradeRFQ

RG3216P-4750-B-T5

SusumuIn Stock: 5880RG3216P-4750-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE07475RL is determined by the following criteria:

Mandatory Compatibility Parameters:

• Resistance value: 475 Ohms (exact match required)
• Package type: 1206 (3216 Metric) form factor
• Power rating: 0.25W minimum
• Composition: Thin film construction
• Operating temperature range: -55°C to 155°C minimum coverage
• Compliance: ROHS3 and REACH status maintained

Allowable Variations:

• Tolerance: May be equal to or tighter than ±1%
• Temperature coefficient: May be equal to or lower than ±50ppm/°C
• Manufacturer: Different manufacturers permitted if all parameters align
• Certifications: Additional certifications (AEC-Q200, anti-sulfur) permitted as upgrades
• Physical dimensions: Minor variations within 1206 package specification acceptable

Three substitute parts meet these criteria with enhanced specifications compared to the original part.

Parameter Comparison

Engineering Selection Recommendations

RT1206BRD07475RL (YAGEO): Direct manufacturer upgrade within the same series. Provides tighter ±0.1% tolerance and improved temperature coefficient (±25ppm/°C) while maintaining identical package and power specifications. Suitable for applications requiring enhanced precision without automotive certification requirements. Active product status with 6735 units in stock.

ERA-8AEB4750V (Panasonic Electronic Components): Introduces AEC-Q200 automotive qualification with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Appropriate for automotive and harsh environment applications where component reliability standards are mandated. Active product status with 5113 units in stock.

RG3216P-4750-B-T5 (Susumu): Combines AEC-Q200 automotive certification with anti-sulfur feature and ±0.1% tolerance. Lowest seated height (0.020" vs 0.026") among substitutes. Optimal for automotive applications in corrosive environments or space-constrained PCB layouts. Active product status with 5778 units in stock.

All substitute parts maintain ROHS3 compliance, MSL 1 rating, and REACH unaffected status. Selection depends on application-specific requirements for tolerance precision and environmental certifications.

Frequently Asked Questions (FAQ)

Q: Can RT1206BRD07475RL replace RT1206FRE07475RL in any application? A: Yes. RT1206BRD07475RL meets or exceeds all electrical and mechanical parameters of the original part. The tighter tolerance (±0.1% vs ±1%) and improved temperature coefficient (±25ppm/°C vs ±50ppm/°C) provide enhanced performance in precision circuits.

Q: What is the difference between the three substitute parts? A: All three substitutes share 475 Ohm resistance, ±0.1% tolerance, 0.25W power rating, and 1206 package. ERA-8AEB4750V and RG3216P-4750-B-T5 add AEC-Q200 automotive certification. RG3216P-4750-B-T5 additionally features anti-sulfur coating and the lowest profile height (0.020").

Q: Are the substitute parts physically interchangeable on the PCB? A: Yes. All parts use the 1206 (3216 Metric) package with identical footprint requirements. Minor dimensional variations (ERA-8AEB4750V and RG3216P-4750-B-T5 are 0.126" L vs 0.122" L for original) remain within 1206 package tolerance and do not affect PCB placement.

Q: Which substitute should I use for automotive applications? A: ERA-8AEB4750V or RG3216P-4750-B-T5. Both carry AEC-Q200 certification required for automotive-grade components. RG3216P-4750-B-T5 is preferred for corrosive environments due to anti-sulfur protection.

Q: Does tolerance improvement affect circuit performance? A: Tighter tolerance (±0.1%) reduces resistor value variation across production batches, improving circuit accuracy and repeatability. This is beneficial for precision analog circuits, measurement applications, and feedback networks where resistor accuracy directly impacts performance.

Q: Are all substitutes in active production? A: Yes. All three substitute parts maintain active product status with current inventory availability: RT1206BRD07475RL (6735 pcs), ERA-8AEB4750V (5113 pcs), RG3216P-4750-B-T5 (5778 pcs).