RT1206FRE07464RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07464RL is a 464 Ohms ±1% thin film chip resistor manufactured by YAGEO in 1206 (3216 Metric) package format. This component is rated for 0.25W (1/4W) power dissipation with an operating temperature range of -55°C to 155°C. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute components are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, design optimization, or application-specific requirements.

Substiute Parts

RT1206FRE07464RL

YAGEOIn Stock: 1293RT1206FRE07464RL Datasheet

Current PartRFQ

ERA-8AEB4640V

Panasonic Electronic ComponentsIn Stock: 10518ERA-8AEB4640V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE07464RL is determined by the following critical parameters:

• Resistance Value: Must be 464 Ohms
• Package Format: Must be 1206 (3216 Metric) to ensure PCB footprint compatibility
• Power Rating: Must be minimum 0.25W (1/4W)
• Composition: Thin film construction maintains electrical performance characteristics
• Operating Temperature Range: Must support -55°C to 155°C minimum
• Compliance: RoHS3 and REACH compliance required for regulatory alignment

The ERA-8AEB4640V qualifies as a direct substitute based on matching all critical parameters while offering enhanced tolerance (±0.1% versus ±1%) and automotive-grade qualification (AEC-Q200).

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206FRE07464RL and ERA-8AEB4640V maintain Active product status with full regulatory compliance (RoHS3, REACH Unaffected). The ERA-8AEB4640V provides enhanced performance characteristics through tighter tolerance specification (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), with automotive-grade AEC-Q200 qualification. Selection between these components should be based on application requirements for tolerance precision and environmental qualification needs rather than functional compatibility, as both components satisfy the electrical and mechanical requirements of the 1206 package format.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB4640V replace RT1206FRE07464RL in existing designs?

A: Yes. Both components share identical resistance value (464 Ohms), package format (1206), power rating (0.25W), and operating temperature range (-55°C to 155°C). The ERA-8AEB4640V offers superior tolerance and temperature stability without requiring design modification.

Q: What are the physical dimension differences between these parts?

A: RT1206FRE07464RL dimensions are 0.122" L × 0.063" W (3.10mm × 1.60mm) with 0.026" maximum seated height. ERA-8AEB4640V dimensions are 0.126" L × 0.063" W (3.20mm × 1.60mm) with 0.028" maximum seated height. Both fit standard 1206 PCB footprints with minimal dimensional variance.

Q: Are there compliance or certification differences?

A: Both components are RoHS3 compliant and REACH unaffected. The ERA-8AEB4640V carries additional AEC-Q200 automotive qualification, which is not a restriction but an enhancement for applications requiring automotive-grade reliability.

Q: Which component should be selected for high-precision applications?

A: The ERA-8AEB4640V is suitable for applications requiring tighter tolerance control due to its ±0.1% tolerance specification and ±25ppm/°C temperature coefficient compared to the RT1206FRE07464RL's ±1% tolerance and ±50ppm/°C coefficient.