RT1206FRE07274RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07274RL is a 274 Ohms ±1% thin film chip resistor in 1206 (3216 Metric) package rated for 0.25W power dissipation. This component is manufactured by YAGEO and maintains Active product status. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package footprint and resistance value, allowing for direct board-level replacement in applications where tolerance, temperature coefficient, or manufacturer requirements differ.

Substiute Parts

RT1206FRE07274RL

YAGEOIn Stock: 988RT1206FRE07274RL Datasheet

Current PartRFQ

RT1206BRD07274RL

YAGEOIn Stock: 982RT1206BRD07274RL Datasheet

UpgradeRFQ

ERA-8AEB2740V

Panasonic Electronic ComponentsIn Stock: 10928ERA-8AEB2740V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT1206FRE07274RL are qualified based on the following criteria:

• Identical resistance value: 274 Ohms
• Identical package footprint: 1206 (3216 Metric)
• Identical power rating: 0.25W
• Identical composition: Thin Film
• Identical operating temperature range: -55°C ~ 155°C
• Identical RoHS and MSL compliance status
• Tolerance equal to or tighter than ±1%
• Temperature coefficient equal to or better than ±50ppm/°C

Two substitute parts meet these criteria: RT1206BRD07274RL (YAGEO, ±0.1% tolerance) and ERA-8AEB2740V (Panasonic, ±0.1% tolerance with AEC-Q200 automotive qualification).

Parameter Comparison

Engineering Selection Recommendations

RT1206BRD07274RL serves as a direct upgrade substitute, offering tighter tolerance (±0.1% versus ±1%) and improved temperature coefficient (±25ppm/°C versus ±50ppm/°C) while maintaining identical package, power rating, and compliance certifications. Both parts are manufactured by YAGEO and carry Active product status.

ERA-8AEB2740V provides equivalent electrical performance with additional AEC-Q200 automotive qualification. This part is manufactured by Panasonic and is suitable for applications requiring automotive-grade reliability. Physical dimensions differ slightly (0.126" L x 0.063" W versus 0.122" L x 0.063" W) and maximum seated height is 0.028" versus 0.026", requiring verification of PCB layout constraints in space-critical applications.

Frequently Asked Questions (FAQ)

Q: Can RT1206BRD07274RL replace RT1206FRE07274RL directly on the PCB?

A: Yes. Both parts share identical package footprint (1206), power rating (0.25W), resistance value (274 Ohms), and operating temperature range (-55°C ~ 155°C). The substitute offers improved tolerance and temperature coefficient specifications.

Q: Is ERA-8AEB2740V compatible with the same PCB layout?

A: The package footprint is identical (1206), but physical dimensions differ slightly. The ERA-8AEB2740V measures 0.126" L x 0.063" W with 0.028" maximum seated height, compared to 0.122" L x 0.063" W with 0.026" maximum seated height for the original part. Verify clearance in space-constrained areas before substitution.

Q: What is the primary difference between the three parts?

A: RT1206FRE07274RL has ±1% tolerance and ±50ppm/°C temperature coefficient. RT1206BRD07274RL and ERA-8AEB2740V both offer ±0.1% tolerance and ±25ppm/°C temperature coefficient. ERA-8AEB2740V includes AEC-Q200 automotive qualification.

Q: Which substitute should be selected for automotive applications?

A: ERA-8AEB2740V carries AEC-Q200 automotive qualification and is the appropriate choice for automotive-grade requirements.

Q: Are all three parts RoHS3 compliant?

A: Yes. All three parts are ROHS3 Compliant with Moisture Sensitivity Level 1 (Unlimited).