RT1206FRE0726K7L Equivalent & Substitute Parts

Part Overview

The RT1206FRE0726K7L is a 26.7 kOhms ±1% thin film chip resistor in 1206 (3216 Metric) package format, rated for 0.25W power dissipation. This YAGEO component is actively produced and ROHS3 compliant. Substitute parts are identified based on matching resistance value, package dimensions, power rating, and operating temperature range, with tolerance and temperature coefficient variations available for applications requiring enhanced precision.

Substiute Parts

RT1206FRE0726K7L

YAGEOIn Stock: 1218RT1206FRE0726K7L Datasheet

Current PartRFQ

RT1206BRD0726K7L

YAGEOIn Stock: 13290RT1206BRD0726K7L Datasheet

UpgradeRFQ

ERA-8AEB2672V

Panasonic Electronic ComponentsIn Stock: 6077ERA-8AEB2672V Datasheet

UpgradeRFQ

RG3216P-2672-B-T5

SusumuIn Stock: 1134RG3216P-2672-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT1206FRE0726K7L are qualified based on the following criteria:

Core Matching Parameters:

• Resistance value: 26.7 kOhms (exact match required)
• Package / Case: 1206 (3216 Metric) form factor
• Power rating: 0.25W minimum
• Operating temperature range: -55°C ~ 155°C minimum
• Composition: Thin film construction
• RoHS compliance: ROHS3 Compliant

Allowable Variations:

• Tolerance: ±1% or tighter (±0.1% acceptable as upgrade)
• Temperature coefficient: ±50ppm/°C or better
• Manufacturer: Different manufacturers permitted
• Additional certifications: AEC-Q200 automotive qualification permitted

All identified substitutes maintain electrical and mechanical compatibility within these parameters.

Parameter Comparison

Engineering Selection Recommendations

RT1206BRD0726K7L (YAGEO): Direct upgrade within the same manufacturer series. Provides improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C) while maintaining identical package and power specifications. Suitable for applications requiring tighter resistance accuracy without automotive qualification requirements.

ERA-8AEB2672V (Panasonic Electronic Components): Cross-manufacturer substitute with AEC-Q200 automotive qualification. Meets all electrical and mechanical parameters with enhanced tolerance and temperature coefficient. Appropriate for automotive applications or systems requiring automotive-grade component reliability.

RG3216P-2672-B-T5 (Susumi): Cross-manufacturer substitute with AEC-Q200 automotive qualification and anti-sulfur feature. Meets all electrical and mechanical parameters with enhanced tolerance and temperature coefficient. Lowest seated height (0.020" vs 0.026") may be relevant for space-constrained applications. Suitable for automotive and harsh environment applications.

All substitutes are actively produced with confirmed inventory availability.

Frequently Asked Questions (FAQ)

Q: Can RT1206BRD0726K7L replace RT1206FRE0726K7L in any application?

A: Yes. RT1206BRD0726K7L is electrically and mechanically compatible. It provides superior tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C), making it suitable for all applications where the original part is specified.

Q: What is the difference between the YAGEO and Panasonic substitutes?

A: Both RT1206BRD0726K7L and ERA-8AEB2672V share identical electrical specifications (26.7 kOhms, ±0.1%, 0.25W). ERA-8AEB2672V includes AEC-Q200 automotive certification, required for automotive applications. Panasonic dimensions are 0.126" L x 0.063" W (3.20mm x 1.60mm) versus YAGEO's 0.122" L x 0.063" W (3.10mm x 1.60mm).

Q: Is the Susumi RG3216P-2672-B-T5 suitable for automotive applications?

A: Yes. RG3216P-2672-B-T5 carries AEC-Q200 automotive qualification and includes anti-sulfur protection. It meets all electrical and mechanical requirements for automotive use.

Q: Are there package compatibility concerns between substitutes?

A: All substitutes use 1206 (3216 Metric) package format with 2 terminations. Minor dimensional variations exist: YAGEO parts are 3.10mm x 1.60mm, while Panasonic and Susumi parts are 3.20mm x 1.60mm. Height differences range from 0.020" to 0.026" seated maximum. These variations are within standard PCB design tolerances for 1206 components.

Q: Can I use these substitutes interchangeably on the same PCB?

A: Yes. All substitutes are mechanically and electrically compatible for PCB assembly. Verify footprint design accommodates the maximum dimensions of the selected substitute (3.20mm x 1.60mm for Panasonic and Susumi).