RT1206FRE0724RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE0724RL is a 24 Ohm ±1% thin film chip resistor in 1206 (3216 Metric) package format, rated for 0.25W (1/4W) power dissipation. This component is manufactured by YAGEO and maintains Active product status with full RoHS3 compliance. Substitute parts are identified when electrical specifications remain within acceptable tolerance ranges while maintaining mechanical compatibility and environmental operating conditions.

Substiute Parts

RT1206FRE0724RL

YAGEOIn Stock: 1043RT1206FRE0724RL Datasheet

Current PartRFQ

RT1206BRD0724RL

YAGEOIn Stock: 7322RT1206BRD0724RL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE0724RL is determined by the following criteria:

• Identical resistance value: 24 Ohms
• Identical package format: 1206 (3216 Metric)
• Identical power rating: 0.25W (1/4W)
• Identical composition: Thin Film
• Identical operating temperature range: -55°C to 155°C
• Identical physical dimensions: 0.122" L x 0.063" W (3.10mm x 1.60mm)
• Identical termination count: 2
• Identical RoHS3 compliance status
• Identical MSL rating: 1 (Unlimited)

Tolerance and temperature coefficient may vary within acceptable engineering margins for equivalent substitution. Packaging format (Tape & Reel vs. Cut Tape) does not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

RT1206BRD0724RL qualifies as a direct substitute for RT1206FRE0724RL based on identical electrical specifications (24 Ohm resistance, 0.25W power rating), mechanical compatibility (1206 package, identical dimensions), and environmental compliance (RoHS3, MSL 1). The substitute part offers improved tolerance (±0.1% vs. ±1%) and lower temperature coefficient (±25ppm/°C vs. ±50ppm/°C), representing enhanced performance characteristics. Both components maintain Active product status and full regulatory compliance. Packaging format differences (Tape & Reel vs. Cut Tape & Digi-Reel) do not affect circuit-level compatibility.

Frequently Asked Questions (FAQ)

Q: Can RT1206BRD0724RL replace RT1206FRE0724RL in existing designs?

A: Yes. Both components share identical resistance values, power ratings, package dimensions, and operating temperature ranges. The substitute offers tighter tolerance and improved temperature stability.

Q: Are there physical compatibility concerns between these parts?

A: No. Both components use the 1206 (3216 Metric) package with identical dimensions (0.122" L x 0.063" W, 3.10mm x 1.60mm) and maximum seated height (0.026" / 0.65mm). PCB footprints are interchangeable.

Q: Does packaging format affect substitution eligibility?

A: No. Packaging format (Tape & Reel vs. Cut Tape & Digi-Reel) is a supply chain consideration only and does not impact electrical or mechanical performance in circuit applications.

Q: Are both parts RoHS compliant?

A: Yes. Both RT1206FRE0724RL and RT1206BRD0724RL maintain ROHS3 compliance with MSL rating of 1 (Unlimited moisture sensitivity level).

Q: What is the significance of tolerance differences?

A: RT1206BRD0724RL provides ±0.1% tolerance compared to ±1% for RT1206FRE0724RL. This represents tighter resistance value control and is suitable for applications requiring higher precision. The substitute is functionally compatible with designs specified for ±1% tolerance.