RT1206FRE07232KL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07232KL is a 232 kOhms ±1% 0.25W chip resistor in 1206 (3216 Metric) package manufactured by YAGEO. This thin film resistor is designed for general-purpose applications requiring moderate tolerance and temperature stability. The part is currently in active production status with 940 units available in stock.

Substitute parts are identified when they maintain identical or superior electrical performance within the same package footprint while meeting the same or stricter compliance requirements. Alternative sources ensure supply chain flexibility and may offer enhanced specifications such as improved tolerance or automotive-grade qualification.

Substiute Parts

RT1206FRE07232KL

YAGEOIn Stock: 1027RT1206FRE07232KL Datasheet

Current PartRFQ

ERA-8AEB2323V

Panasonic Electronic ComponentsIn Stock: 10098ERA-8AEB2323V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE07232KL is determined by the following criteria:

• Identical resistance value: 232 kOhms
• Equal or superior tolerance: ±1% or better
• Identical or superior power rating: 0.25W minimum
• Identical package footprint: 1206 (3216 Metric)
• Identical composition: Thin Film
• Operating temperature range: -55°C to 155°C minimum
• Compliance: ROHS3 and REACH requirements met

The ERA-8AEB2323V qualifies as a direct substitute by meeting all electrical and mechanical parameters while offering improved tolerance (±0.1% versus ±1%) and automotive-grade AEC-Q200 qualification.

Parameter Comparison

Engineering Selection Recommendations

Both parts maintain active production status and full compliance with ROHS3 and REACH requirements. The RT1206FRE07232KL serves applications where standard tolerance and general-purpose specifications are sufficient. The ERA-8AEB2323V provides enhanced performance through tighter tolerance (±0.1%) and automotive-grade AEC-Q200 qualification, making it suitable for applications requiring higher precision or automotive-qualified component sourcing.

Selection between these parts depends on application requirements: use the RT1206FRE07232KL for standard industrial applications, or specify the ERA-8AEB2323V when automotive qualification or improved tolerance is mandated by design specifications.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB2323V replace RT1206FRE07232KL in existing designs?

A: Yes. Both parts share identical resistance value, power rating, package footprint, and operating temperature range. The ERA-8AEB2323V offers superior tolerance and automotive qualification without requiring design modifications.

Q: What is the difference in physical dimensions between these parts?

A: RT1206FRE07232KL measures 0.122" L × 0.063" W (3.10mm × 1.60mm) with 0.026" maximum seated height. ERA-8AEB2323V measures 0.126" L × 0.063" W (3.20mm × 1.60mm) with 0.028" maximum seated height. Both fit standard 1206 footprints; verify PCB layout clearances for the slightly larger ERA-8AEB2323V dimensions.

Q: Are both parts suitable for high-temperature applications?

A: Yes. Both parts operate across -55°C to 155°C. The ERA-8AEB2323V provides superior temperature stability with ±25ppm/°C coefficient compared to ±50ppm/°C for the RT1206FRE07232KL.

Q: What does AEC-Q200 qualification mean?

A: AEC-Q200 is an automotive industry standard for passive components. The ERA-8AEB2323V meets this qualification, indicating suitability for automotive applications requiring enhanced reliability and quality assurance.

Q: Are moisture sensitivity levels identical?

A: Yes. Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity concerns during storage or handling.