RT1206FRE07215KL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07215KL is a 215 kOhms ±1% 0.25W thin film chip resistor in 1206 (3216 Metric) package manufactured by YAGEO. This component is actively produced and widely used in general-purpose electronic applications requiring precision resistive elements. Equivalent and substitute parts are identified when design requirements permit tolerance relaxation, performance upgrades, or supply chain optimization while maintaining functional compatibility within the specified electrical and mechanical parameters.

Substiute Parts

RT1206FRE07215KL

YAGEOIn Stock: 913RT1206FRE07215KL Datasheet

Current PartRFQ

ERA-8AEB2153V

Panasonic Electronic ComponentsIn Stock: 6895ERA-8AEB2153V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE07215KL is determined by the following criteria:

• Resistance value must be 215 kOhms
• Package / Case must be 1206 (3216 Metric)
• Power rating must be 0.25W (1/4W) or greater
• Composition must be thin film
• Operating temperature range must encompass -55°C ~ 155°C
• RoHS3 compliance required
• Tolerance may be equal to or tighter than ±1%
• Temperature coefficient may be equal to or lower than ±50ppm/°C

The ERA-8AEB2153V qualifies as a direct substitute based on these parameters. It maintains identical resistance, package, power rating, and operating temperature range while offering improved tolerance (±0.1% versus ±1%) and superior temperature coefficient (±25ppm/°C versus ±50ppm/°C).

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206FRE07215KL and ERA-8AEB2153V are active products with ROHS3 compliance and unlimited moisture sensitivity rating. The ERA-8AEB2153V offers enhanced performance characteristics through tighter tolerance (±0.1%) and lower temperature coefficient (±25ppm/°C), making it suitable for applications requiring higher precision. The ERA-8AEB2153V carries AEC-Q200 automotive qualification, which provides additional reliability assurance for demanding environments. Selection between these parts should be based on application-specific tolerance and temperature stability requirements, as well as supply availability and cost considerations.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB2153V replace RT1206FRE07215KL in all applications?

A: Yes, within the scope of electrical and mechanical compatibility. The ERA-8AEB2153V maintains identical resistance, power rating, package, and operating temperature range. The improved tolerance and temperature coefficient represent performance enhancements rather than limitations.

Q: Are there physical differences between these parts?

A: Both parts use the 1206 (3216 Metric) package. Dimensional variations exist within tolerance: RT1206FRE07215KL measures 0.122" L x 0.063" W (3.10mm x 1.60mm) with 0.026" maximum seated height, while ERA-8AEB2153V measures 0.126" L x 0.063" W (3.20mm x 1.60mm) with 0.028" maximum seated height. These differences remain within standard 1206 package specifications and do not affect PCB layout compatibility.

Q: What is the significance of the ±0.1% tolerance in ERA-8AEB2153V?

A: The ±0.1% tolerance provides tighter resistance value control compared to the ±1% tolerance of RT1206FRE07215KL. This is beneficial in precision analog circuits, measurement instrumentation, and applications where resistance accuracy directly impacts circuit performance.

Q: Does AEC-Q200 qualification matter for non-automotive applications?

A: AEC-Q200 qualification indicates enhanced reliability testing and quality assurance. While designed for automotive use, this certification demonstrates superior component reliability and may be advantageous in any application requiring high reliability standards.

Q: Are both parts RoHS compliant?

A: Yes, both RT1206FRE07215KL and ERA-8AEB2153V are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.