RT1206FRE0719K6L Equivalent & Substitute Parts

Part Overview

The RT1206FRE0719K6L is a 19.6 kOhms ±1% thin film chip resistor manufactured by YAGEO in 1206 (3216 Metric) package format. This component is actively produced and widely used in general-purpose electronic applications requiring precision resistive elements. Finding equivalent and substitute parts becomes necessary when managing supply chain continuity, optimizing cost structures, or meeting specific application requirements such as enhanced tolerance specifications or automotive-grade reliability standards.

Substiute Parts

RT1206FRE0719K6L

YAGEOIn Stock: 981RT1206FRE0719K6L Datasheet

Current PartRFQ

ERA-8AEB1962V

Panasonic Electronic ComponentsIn Stock: 9891ERA-8AEB1962V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RT1206FRE0719K6L is determined by strict adherence to the following electrical and mechanical parameters:

• Resistance Value: Must be 19.6 kOhms
• Package Format: Must be 1206 (3216 Metric) to ensure PCB footprint compatibility
• Power Rating: Must be 0.25W (1/4W) or higher
• Composition: Thin film construction maintains performance characteristics
• Operating Temperature Range: Must support -55°C to 155°C minimum
• Compliance: RoHS3 compliance and MSL 1 rating required

The ERA-8AEB1962V qualifies as a direct substitute based on these parameters. While it offers enhanced tolerance (±0.1% versus ±1%) and superior temperature coefficient (±25ppm/°C versus ±50ppm/°C), these represent performance improvements rather than deviations from the core substitution criteria.

Parameter Comparison

Engineering Selection Recommendations

Both components meet the core substitution criteria for 19.6 kOhms thin film resistors in 1206 package format. Selection between them depends on application-specific requirements:

The RT1206FRE0719K6L remains suitable for general-purpose applications where ±1% tolerance and standard temperature coefficient performance are acceptable.

The ERA-8AEB1962V is appropriate for applications requiring enhanced tolerance control (±0.1%), improved temperature stability (±25ppm/°C), or automotive-grade reliability certification (AEC-Q200). Both components maintain identical RoHS3 compliance and MSL 1 moisture sensitivity ratings, ensuring equivalent environmental and regulatory performance.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB1962V replace RT1206FRE0719K6L in any application?

A: Yes, from a mechanical and electrical compatibility standpoint. The ERA-8AEB1962V meets all core substitution parameters: identical resistance value, package format, power rating, and operating temperature range. The improved tolerance and temperature coefficient represent performance enhancements rather than incompatibilities.

Q: Are there dimensional differences between these parts?

A: Minor dimensional variations exist. The RT1206FRE0719K6L measures 0.122" L × 0.063" W (3.10mm × 1.60mm) with 0.026" maximum seated height. The ERA-8AEB1962V measures 0.126" L × 0.063" W (3.20mm × 1.60mm) with 0.028" maximum seated height. Both fit standard 1206 footprints; verify PCB layout constraints for high-density applications.

Q: What is the significance of the AEC-Q200 rating on the ERA-8AEB1962V?

A: AEC-Q200 certification indicates automotive-grade reliability qualification. This rating is relevant only if your application requires automotive-level component qualification. For non-automotive applications, this certification provides no functional advantage.

Q: Do both parts have identical RoHS and REACH compliance?

A: Yes. Both RT1206FRE0719K6L and ERA-8AEB1962V are ROHS3 compliant and REACH unaffected, ensuring equivalent environmental and regulatory compliance across applications.

Q: Which part should be selected for cost optimization?

A: Component selection based on cost alone is outside the scope of this engineering reference. Consult procurement and supply chain documentation for pricing and availability data.