RT1206FRE07162RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07162RL is a 162 Ohm ±1% thin film chip resistor manufactured by YAGEO in 1206 (3216 Metric) package format with 0.25W power rating. This component is actively produced and widely used in general-purpose electronic applications requiring standard tolerance resistive elements. Substitute parts are identified to provide alternative sourcing options when the primary part becomes unavailable or when design requirements necessitate enhanced performance characteristics such as improved tolerance or automotive qualification.

Substiute Parts

RT1206FRE07162RL

YAGEOIn Stock: 1129RT1206FRE07162RL Datasheet

Current PartRFQ

ERA-8AEB1620V

Panasonic Electronic ComponentsIn Stock: 8936ERA-8AEB1620V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The ERA-8AEB1620V from Panasonic Electronic Components qualifies as a direct substitute for the RT1206FRE07162RL based on the following critical parameters:

• Identical resistance value: 162 Ohms
• Identical package format: 1206 (3216 Metric)
• Identical power rating: 0.25W (1/4W)
• Identical composition: Thin Film
• Identical operating temperature range: -55°C to 155°C
• Identical RoHS3 compliance and MSL rating

The ERA-8AEB1620V provides enhanced tolerance (±0.1% versus ±1%) and automotive AEC-Q200 qualification, making it suitable for applications requiring tighter tolerance specifications or automotive-grade reliability standards while maintaining full mechanical and electrical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206FRE07162RL and ERA-8AEB1620V are active products with ROHS3 compliance and unlimited moisture sensitivity ratings, ensuring regulatory compliance for current manufacturing standards.

The RT1206FRE07162RL is appropriate for general-purpose applications where standard ±1% tolerance meets circuit requirements and cost optimization is a priority.

The ERA-8AEB1620V is appropriate for applications requiring tighter tolerance control (±0.1%), lower temperature coefficient performance (±25ppm/°C versus ±50ppm/°C), or automotive-grade reliability through AEC-Q200 qualification. The improved temperature coefficient provides superior stability across the full operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB1620V replace RT1206FRE07162RL in existing designs?

A: Yes. Both components share identical resistance value, package format, power rating, and operating temperature range. The ERA-8AEB1620V provides enhanced tolerance and temperature coefficient performance with full mechanical compatibility.

Q: What are the physical dimension differences?

A: RT1206FRE07162RL dimensions are 0.122" L × 0.063" W (3.10mm × 1.60mm) with maximum seated height of 0.026" (0.65mm). ERA-8AEB1620V dimensions are 0.126" L × 0.063" W (3.20mm × 1.60mm) with maximum seated height of 0.028" (0.70mm). Both fit standard 1206 footprints with minimal dimensional variance.

Q: What is the significance of the ±0.1% tolerance in ERA-8AEB1620V?

A: The ±0.1% tolerance provides tighter resistance value control compared to the ±1% tolerance of RT1206FRE07162RL. This is critical for precision analog circuits, measurement equipment, and applications where resistance accuracy directly impacts circuit performance.

Q: Is AEC-Q200 qualification required for non-automotive applications?

A: No. AEC-Q200 qualification is specific to automotive-grade reliability standards. Non-automotive applications can use either component based on tolerance and performance requirements alone.

Q: Are both components available in the same packaging format?

A: Yes. Both components are supplied in Tape & Reel (TR) packaging suitable for automated assembly processes.