RT1206FRE07147RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07147RL is a 147 Ohm ±1% thin film chip resistor manufactured by YAGEO in 1206 (3216 Metric) package format. This surface mount device is rated for 0.25W (1/4W) power dissipation with an operating temperature range of -55°C to 155°C. The part is ROHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity rating, indicating suitability for standard storage and handling conditions.

The product maintains Active status with 953 pieces currently in stock. Substitute parts are identified when equivalent electrical performance can be achieved through alternative manufacturers while maintaining or improving upon the original specifications within the same package footprint and thermal operating range.

Substiute Parts

RT1206FRE07147RL

YAGEOIn Stock: 1018RT1206FRE07147RL Datasheet

Current PartRFQ

ERA-8AEB1470V

Panasonic Electronic ComponentsIn Stock: 17565ERA-8AEB1470V Datasheet

UpgradeRFQ

RG3216P-1470-B-T5

SusumuIn Stock: 5763RG3216P-1470-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE07147RL is determined by the following mandatory parameters:

• Resistance Value: Must be 147 Ohms
• Package Format: Must be 1206 (3216 Metric)
• Power Rating: Must be 0.25W (1/4W) minimum
• Composition: Must be Thin Film
• Operating Temperature Range: Must encompass -55°C to 155°C
• RoHS Compliance: Must be ROHS3 Compliant
• Termination Count: Must be 2 terminations

The identified substitute parts meet all mandatory parameters. Tolerance specifications may be equal to or tighter than the original part. Temperature coefficient and dimensional variations within the 1206 package envelope do not preclude substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts ERA-8AEB1470V and RG3216P-1470-B-T5 are functionally equivalent to the RT1206FRE07147RL with enhanced specifications. The substitute parts offer tighter tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), resulting in improved stability across the operating temperature range.

ERA-8AEB1470V carries AEC-Q200 automotive qualification from Panasonic Electronic Components with 17,501 pieces in stock inventory.

RG3216P-1470-B-T5 carries AEC-Q200 automotive qualification from Susumu with anti-sulfur protection and 5,725 pieces in stock inventory. This part features the lowest maximum seated height at 0.020" (0.50mm) compared to 0.026" (0.65mm) for the original part.

All three parts maintain ROHS3 compliance and Level 1 MSL rating. Selection between the original and substitute parts depends on application-specific requirements for tolerance precision, temperature stability, and automotive qualification status.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB1470V or RG3216P-1470-B-T5 be used as direct replacements for RT1206FRE07147RL?

A: Yes. Both substitute parts share identical resistance value (147 Ohms), power rating (0.25W), package format (1206), composition (thin film), and operating temperature range (-55°C to 155°C). All three parts are ROHS3 compliant with Level 1 MSL rating.

Q: What are the key differences between the substitute parts?

A: ERA-8AEB1470V and RG3216P-1470-B-T5 both offer ±0.1% tolerance and ±25ppm/°C temperature coefficient compared to the original ±1% tolerance and ±50ppm/°C. RG3216P-1470-B-T5 includes anti-sulfur protection and features a lower seated height (0.020" versus 0.026"). Both substitute parts carry AEC-Q200 automotive qualification.

Q: Are there dimensional compatibility concerns with the substitute parts?

A: All parts conform to the 1206 (3216 Metric) package standard. Dimensional variations exist within this envelope: the original part measures 0.122" L × 0.063" W with 0.026" maximum seated height, while substitute parts measure 0.126" L × 0.063" W with seated heights of 0.028" (Panasonic) and 0.020" (Susumu). These variations remain within standard 1206 package tolerances and do not affect PCB footprint compatibility.

Q: Which substitute part should be selected for automotive applications?

A: Both ERA-8AEB1470V and RG3216P-1470-B-T5 carry AEC-Q200 automotive qualification. RG3216P-1470-B-T5 additionally features anti-sulfur protection, providing enhanced reliability in corrosive environments.

Q: Do the substitute parts maintain the same moisture sensitivity level?

A: Yes. All three parts carry MSL Level 1 (Unlimited) rating, indicating identical moisture sensitivity classification and storage requirements.