RT1206FRE0713K3L Equivalent & Substitute Parts

Part Overview

The RT1206FRE0713K3L is a 13.3 kOhms ±1% thin film chip resistor in 1206 (3216 Metric) package format, rated for 0.25W power dissipation. This YAGEO component is actively produced and ROHS3 compliant, designed for applications requiring standard tolerance precision resistors with stable performance across the -55°C to 155°C operating range. Substitute parts are identified for applications requiring improved tolerance specifications, enhanced temperature stability, or automotive-grade reliability certifications.

Substiute Parts

RT1206FRE0713K3L

YAGEOIn Stock: 816RT1206FRE0713K3L Datasheet

Current PartRFQ

RT1206BRD0713K3L

YAGEOIn Stock: 3219RT1206BRD0713K3L Datasheet

UpgradeRFQ

RT1206DRE0713K3L

YAGEOIn Stock: 2534RT1206DRE0713K3L Datasheet

UpgradeRFQ

ERA-8AEB1332V

Panasonic Electronic ComponentsIn Stock: 7717ERA-8AEB1332V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT1206FRE0713K3L are qualified based on the following criteria:

Mandatory Compatibility Parameters:

• Resistance value: 13.3 kOhms (exact match required)
• Package format: 1206 (3216 Metric)
• Power rating: 0.25W minimum
• Composition: Thin film
• Operating temperature range: -55°C to 155°C minimum
• Termination count: 2

Substitution Categories:

Tolerance Upgrade Substitutes: RT1206BRD0713K3L and RT1206DRE0713K3L offer improved tolerance specifications (±0.1% and ±0.5% respectively) while maintaining identical package, power rating, and operating temperature range. These are direct upgrades for applications requiring tighter resistance accuracy.

Cross-Manufacturer Substitute: ERA-8AEB1332V (Panasonic) provides ±0.1% tolerance with automotive AEC-Q200 certification. Physical dimensions vary slightly (0.126" L vs 0.122" L; 0.028" H vs 0.026" H maximum seated height) but remain within 1206 package classification. This substitute is suitable for automotive applications requiring enhanced reliability qualification.

Parameter Comparison

Engineering Selection Recommendations

RT1206BRD0713K3L (YAGEO): Select this substitute when circuit design requires ±0.1% tolerance accuracy with improved temperature coefficient performance (±25ppm/°C). Identical package footprint and power rating ensure direct PCB compatibility. ROHS3 compliance maintained.

RT1206DRE0713K3L (YAGEO): Select this substitute when ±0.5% tolerance meets application requirements while maintaining cost efficiency relative to ±0.1% alternatives. Temperature coefficient remains ±50ppm/°C, matching the original part specification.

ERA-8AEB1332V (Panasonic): Select this substitute for automotive applications requiring AEC-Q200 qualification. Provides ±0.1% tolerance and ±25ppm/°C temperature coefficient. Minor physical dimension variations (length 0.126" vs 0.122"; height 0.028" vs 0.026" maximum) remain within 1206 package specification and do not affect PCB layout compatibility. ROHS3 compliance maintained.

Frequently Asked Questions (FAQ)

Q: Can RT1206BRD0713K3L replace RT1206FRE0713K3L in any application?

A: Yes, within the constraints of tolerance requirements. RT1206BRD0713K3L provides superior tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C). It is electrically and mechanically compatible with identical package format, power rating, and operating temperature range. Applications designed for ±1% tolerance will function with this substitute; applications requiring ±1% tolerance as a maximum specification will benefit from the improved accuracy.

Q: What is the primary difference between RT1206DRE0713K3L and RT1206BRD0713K3L?

A: Tolerance specification differs: RT1206DRE0713K3L provides ±0.5% tolerance while RT1206BRD0713K3L provides ±0.1% tolerance. Both maintain identical package, power rating, and operating temperature range. Temperature coefficient remains ±50ppm/°C for the DRE variant and ±25ppm/°C for the BRD variant. Selection depends on circuit tolerance requirements and cost considerations.

Q: Is ERA-8AEB1332V suitable for non-automotive applications?

A: Yes. ERA-8AEB1332V meets all electrical and mechanical requirements for standard industrial applications. AEC-Q200 automotive certification represents an additional qualification level, not a limitation. The part is ROHS3 compliant and maintains identical resistance, power rating, and operating temperature range as the original RT1206FRE0713K3L.

Q: Are there physical dimension differences that affect PCB layout?

A: ERA-8AEB1332V exhibits minor dimension variations: length 0.126" (3.20mm) versus 0.122" (3.10mm) for YAGEO parts, and maximum seated height 0.028" (0.70mm) versus 0.026" (0.65mm). These variations remain within 1206 package specification tolerances and do not require PCB footprint modification. YAGEO substitutes (RT1206BRD0713K3L and RT1206DRE0713K3L) are dimensionally identical to the original part.

Q: Which substitute offers the best temperature stability?

A: Both RT1206BRD0713K3L and ERA-8AEB1332V provide ±25ppm/°C temperature coefficient, superior to the original RT1206FRE0713K3L specification of ±50ppm/°C. RT1206DRE0713K3L maintains ±50ppm/°C matching the original part.