RT1206FRE07130RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07130RL is a 130 Ohms ±1% thin film chip resistor in 1206 (3216 Metric) package rated for 0.25W power dissipation. This YAGEO component is actively produced and ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained within the allowed parameter tolerances for this resistor category.

Substiute Parts

RT1206FRE07130RL

YAGEOIn Stock: 1070RT1206FRE07130RL Datasheet

Current PartRFQ

RT1206BRD07130RL

YAGEOIn Stock: 19369RT1206BRD07130RL Datasheet

UpgradeRFQ

ERA-8AEB131V

Panasonic Electronic ComponentsIn Stock: 16190ERA-8AEB131V Datasheet

UpgradeRFQ

RG3216P-1300-B-T1

SusumuIn Stock: 5097RG3216P-1300-B-T1 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

• Resistance Value: Must be 130 Ohms
• Package Type: Must be 1206 (3216 Metric) with compatible footprint dimensions
• Power Rating: Must be 0.25W minimum
• Composition: Thin film construction
• Operating Temperature: Must support -55°C to 155°C range
• Compliance: ROHS3 compliant, MSL 1 rating

The RT1206FRE07130RL tolerance of ±1% permits substitution with parts having equal or tighter tolerance specifications (±0.1%). All identified substitutes maintain identical resistance values, package dimensions, power ratings, and temperature operating ranges.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain active product status and ROHS3 compliance. Selection between substitutes depends on application-specific requirements:

RT1206BRD07130RL (YAGEO): Tighter tolerance specification (±0.1%) with improved temperature coefficient (±25ppm/°C) compared to the primary part. Same manufacturer as the main component.

ERA-8AEB131V (Panasonic): Meets ±0.1% tolerance and includes AEC-Q200 automotive qualification. Suitable for automotive applications requiring enhanced reliability standards.

RG3216P-1300-B-T1 (Susumu): Combines ±0.1% tolerance with AEC-Q200 automotive qualification and anti-sulfur feature. Lowest maximum seated height (0.020") among substitutes.

Frequently Asked Questions (FAQ)

Q: Can RT1206BRD07130RL replace RT1206FRE07130RL in any application?

A: Yes. Both parts share identical resistance value, power rating, package dimensions, and operating temperature range. The substitute has tighter tolerance (±0.1% vs ±1%) and lower temperature coefficient, making it functionally compatible for direct substitution.

Q: What is the difference between automotive-qualified and standard versions?

A: ERA-8AEB131V and RG3216P-1300-B-T1 carry AEC-Q200 automotive qualification. This certification indicates compliance with automotive reliability and environmental stress testing standards. Use automotive-qualified parts only when application requirements specify AEC-Q200 compliance.

Q: Are there physical footprint differences between these parts?

A: All parts use 1206 (3216 Metric) package. ERA-8AEB131V and RG3216P-1300-B-T1 have slightly different dimensions: 0.126" L x 0.063" W (3.20mm x 1.60mm) versus 0.122" L x 0.063" W (3.10mm x 1.60mm) for the primary part. Maximum seated heights vary: 0.026" (0.65mm) for RT1206FRE07130RL, 0.028" (0.70mm) for ERA-8AEB131V, and 0.020" (0.50mm) for RG3216P-1300-B-T1. Verify PCB layout clearances before substitution.

Q: Which substitute offers the best temperature stability?

A: All substitutes have ±25ppm/°C temperature coefficient, compared to ±50ppm/°C for the primary part. This represents improved stability across the -55°C to 155°C operating range.

Q: Are all parts RoHS3 compliant?

A: Yes. RT1206FRE07130RL and all substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.