RT1206FRE07130KL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07130KL is a 130 kOhms ±1% thin film chip resistor manufactured by YAGEO in 1206 (3216 Metric) package format with 0.25W power rating. This component is actively produced and widely used in general-purpose electronic applications requiring precision resistive elements. Substitute parts are identified to provide alternative sourcing options when the primary part becomes unavailable or when design requirements necessitate enhanced performance characteristics such as improved tolerance or automotive qualification.

Substiute Parts

RT1206FRE07130KL

YAGEOIn Stock: 722RT1206FRE07130KL Datasheet

Current PartRFQ

ERA-8AEB134V

Panasonic Electronic ComponentsIn Stock: 17703ERA-8AEB134V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT1206FRE07130KL are qualified based on the following criteria:

• Identical resistance value: 130 kOhms
• Identical package format: 1206 (3216 Metric)
• Identical power rating: 0.25W
• Identical composition: Thin Film
• Identical operating temperature range: -55°C to 155°C
• Identical RoHS3 compliance and MSL 1 rating
• Compatible termination count: 2 terminations

The ERA-8AEB134V qualifies as a direct substitute while offering enhanced tolerance (±0.1% versus ±1%) and automotive AEC-Q200 qualification, making it suitable for applications requiring higher precision or automotive-grade reliability.

Parameter Comparison

Engineering Selection Recommendations

The RT1206FRE07130KL and ERA-8AEB134V are electrically and mechanically interchangeable for 1206 package applications requiring 130 kOhms resistance at 0.25W power dissipation. Both components maintain ROHS3 compliance and MSL 1 moisture sensitivity ratings, ensuring compatibility with standard PCB assembly and storage protocols.

The ERA-8AEB134V provides enhanced performance through tighter tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), along with AEC-Q200 automotive qualification. Selection between these parts depends on application-specific tolerance requirements and whether automotive-grade reliability is mandated by design specifications.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB134V replace RT1206FRE07130KL in existing designs?

A: Yes. Both components share identical resistance value, power rating, package format, and operating temperature range. Physical dimensions are compatible within standard PCB layout tolerances. The ERA-8AEB134V's improved tolerance and lower temperature coefficient represent performance enhancements rather than compatibility limitations.

Q: What are the dimensional differences between these parts?

A: RT1206FRE07130KL measures 0.122" L × 0.063" W (3.10mm × 1.60mm) with maximum seated height of 0.026" (0.65mm). ERA-8AEB134V measures 0.126" L × 0.063" W (3.20mm × 1.60mm) with maximum seated height of 0.028" (0.70mm). These variations fall within standard 1206 package tolerances and do not affect PCB footprint compatibility.

Q: Are both parts suitable for high-reliability applications?

A: Both components are ROHS3 compliant with MSL 1 rating. The ERA-8AEB134V additionally carries AEC-Q200 automotive qualification, making it the specified choice for automotive or high-reliability applications where automotive-grade component certification is required.

Q: What is the significance of tolerance differences?

A: The RT1206FRE07130KL provides ±1% tolerance, while ERA-8AEB134V provides ±0.1% tolerance. Applications requiring tighter resistance value control should specify the ERA-8AEB134V. General-purpose applications typically accept the ±1% tolerance of the RT1206FRE07130KL.