RT1206FRE0711KL Equivalent & Substitute Parts

Part Overview

The RT1206FRE0711KL is a 1206 package thin film chip resistor manufactured by YAGEO, rated at 11 kOhms with ±1% tolerance and 0.25W power dissipation. The component is active in production status with ROHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified to address applications requiring tighter tolerance specifications, automotive-grade reliability, or alternative manufacturer sourcing while maintaining electrical and mechanical compatibility.

Substiute Parts

RT1206FRE0711KL

YAGEOIn Stock: 5809RT1206FRE0711KL Datasheet

Current PartRFQ

RT1206BRD0711KL

YAGEOIn Stock: 4481RT1206BRD0711KL Datasheet

UpgradeRFQ

ERA-8AEB113V

Panasonic Electronic ComponentsIn Stock: 10212ERA-8AEB113V Datasheet

UpgradeRFQ

RG3216P-1102-B-T5

SusumuIn Stock: 1167RG3216P-1102-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following mandatory parameters:

• Resistance value: 11 kOhms (exact match required)
• Package: 1206 (3216 Metric) (exact match required)
• Power rating: 0.25W minimum (equal or higher acceptable)
• Composition: Thin film (maintains electrical performance characteristics)
• Operating temperature range: -55°C to 155°C minimum (equal or wider acceptable)
• RoHS compliance: ROHS3 (maintained across all substitutes)

Tolerance and temperature coefficient may vary within substitute parts. Tighter tolerance specifications (±0.1% vs ±1%) and lower temperature coefficients (±25ppm/°C vs ±50ppm/°C) represent performance upgrades. Automotive-grade certifications (AEC-Q200) and anti-sulfur features are additional qualifications available in select substitutes.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active production status and ROHS3 compliance. Selection between substitutes depends on application requirements:

RT1206BRD0711KL offers tighter tolerance (±0.1%) and improved temperature stability (±25ppm/°C) compared to the original part, with identical YAGEO manufacturing and packaging specifications.

ERA-8AEB113V provides equivalent electrical performance to RT1206BRD0711KL with the addition of Panasonic manufacturing and automotive-grade AEC-Q200 qualification for applications requiring automotive reliability standards.

RG3216P-1102-B-T5 combines automotive AEC-Q200 qualification with anti-sulfur protection, manufactured by Susumu, suitable for harsh environmental or automotive applications requiring enhanced corrosion resistance.

Frequently Asked Questions (FAQ)

Q: Can RT1206BRD0711KL directly replace RT1206FRE0711KL?

A: Yes. Both parts share identical resistance (11 kOhms), power rating (0.25W), package (1206), and operating temperature range (-55°C to 155°C). RT1206BRD0711KL provides improved tolerance (±0.1% vs ±1%) and temperature coefficient (±25ppm/°C vs ±50ppm/°C) with no mechanical or electrical incompatibility.

Q: What is the difference between standard and automotive-grade substitutes?

A: ERA-8AEB113V and RG3216P-1102-B-T5 carry AEC-Q200 automotive qualification, indicating compliance with automotive reliability and environmental stress testing standards. These are suitable for automotive applications; standard industrial-grade parts are not qualified for automotive use.

Q: Does RG3216P-1102-B-T5 anti-sulfur feature affect compatibility?

A: No. Anti-sulfur protection is an additional material property that prevents sulfur-induced corrosion in harsh environments. It does not alter electrical performance or mechanical fit. The part remains mechanically and electrically compatible with the original specification.

Q: Are there dimensional differences between substitutes?

A: Minor dimensional variations exist. RT1206FRE0711KL measures 0.122" L × 0.063" W (3.10mm × 1.60mm) with 0.026" max height. ERA-8AEB113V and RG3216P-1102-B-T5 measure 0.126" L × 0.063" W (3.20mm × 1.60mm) with 0.028" and 0.020" max heights respectively. These variations remain within 1206 package tolerance and do not affect PCB layout compatibility.

Q: Can substitutes be mixed in the same assembly?

A: Yes. All substitutes share identical electrical ratings (11 kOhms, 0.25W, -55°C to 155°C), package classification (1206), and RoHS compliance. Mixed sourcing is permissible from an engineering standpoint; procurement and quality control policies may impose additional restrictions.