RT1206FRE07115RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07115RL is a 115 Ohms ±1% 0.25W thin film chip resistor in 1206 (3216 Metric) package manufactured by YAGEO. This component is actively produced and widely used in general-purpose electronic applications requiring standard tolerance resistive elements. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and compliance requirements can be met by alternative manufacturers while maintaining or improving upon the original specifications.

Substiute Parts

RT1206FRE07115RL

YAGEOIn Stock: 1047RT1206FRE07115RL Datasheet

Current PartRFQ

ERA-8AEB1150V

Panasonic Electronic ComponentsIn Stock: 5938ERA-8AEB1150V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE07115RL is determined by the following criteria:

• Identical resistance value: 115 Ohms
• Package compatibility: 1206 (3216 Metric) form factor
• Mechanical fit: Physical dimensions and termination count must support direct board-level replacement
• Electrical performance: Thin film composition with operating temperature range of -55°C ~ 155°C or better
• Compliance: ROHS3 compliance and MSL 1 rating required
• Tolerance: Equal to or tighter than ±1%

The ERA-8AEB1150V from Panasonic Electronic Components meets all substitution criteria with enhanced specifications in tolerance and temperature coefficient performance.

Parameter Comparison

Engineering Selection Recommendations

The ERA-8AEB1150V qualifies as a direct substitute for the RT1206FRE07115RL based on matching electrical specifications, identical package form factor, and equivalent compliance certifications. The Panasonic component offers improved tolerance (±0.1% versus ±1%) and superior temperature coefficient stability (±25ppm/°C versus ±50ppm/°C), making it suitable for applications requiring tighter resistance accuracy. Both components maintain ROHS3 compliance and MSL 1 rating, ensuring compatibility with standard manufacturing and storage protocols. Selection between these parts should be based on application-specific tolerance requirements and cost considerations.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB1150V be used as a direct replacement for RT1206FRE07115RL?

A: Yes. Both components share identical resistance values, power ratings, package dimensions (1206), and operating temperature ranges. Physical board-level replacement is mechanically and electrically compatible.

Q: What are the key differences between these two parts?

A: The primary differences are tolerance grade (±0.1% versus ±1%) and temperature coefficient (±25ppm/°C versus ±50ppm/°C). The Panasonic ERA-8AEB1150V provides higher precision and better thermal stability. Both maintain equivalent compliance and reliability ratings.

Q: Are there any dimensional concerns when substituting?

A: Dimensions are compatible. The RT1206FRE07115RL measures 0.122" L x 0.063" W (3.10mm x 1.60mm) with 0.026" max height. The ERA-8AEB1150V measures 0.126" L x 0.063" W (3.20mm x 1.60mm) with 0.028" max height. These minor variations remain within standard 1206 package tolerances and do not affect board-level placement or routing.

Q: Do both parts meet automotive qualification standards?

A: The RT1206FRE07115RL is a general-purpose component. The ERA-8AEB1150V carries AEC-Q200 automotive qualification, making it suitable for automotive applications where the original part may not be specified.

Q: What is the moisture sensitivity rating for both components?

A: Both components are rated MSL 1 (Unlimited), indicating no moisture sensitivity concerns and unlimited shelf life under standard storage conditions.