RT1206FRE07113RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07113RL is a 113 Ohms ±1% thin film chip resistor manufactured by YAGEO in the 1206 (3216 Metric) package format. This surface mount device is rated for 0.25W (1/4W) power dissipation and operates across the temperature range of -55°C to 155°C. The part maintains Active product status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are identified to provide design flexibility, inventory alternatives, and performance optimization options for applications requiring 113 Ohm resistive elements in compact SMD form factors.

Substiute Parts

RT1206FRE07113RL

YAGEOIn Stock: 1135RT1206FRE07113RL Datasheet

Current PartRFQ

ERA-8AEB1130V

Panasonic Electronic ComponentsIn Stock: 2120ERA-8AEB1130V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE07113RL is determined by the following critical parameters:

• Resistance value: 113 Ohms (exact match required)
• Package format: 1206 (3216 Metric) (physical and electrical compatibility)
• Power rating: 0.25W minimum (equal or greater capacity acceptable)
• Composition: Thin film construction (maintains performance characteristics)
• Operating temperature range: -55°C to 155°C minimum (equal or wider range acceptable)
• Regulatory compliance: ROHS3 and REACH status (environmental standards alignment)

The ERA-8AEB1130V qualifies as a substitute based on matching resistance, package, power rating, composition, temperature range, and compliance certifications. Enhanced specifications (±0.1% tolerance, ±25ppm/°C temperature coefficient, AEC-Q200 automotive qualification) represent performance upgrades rather than compatibility limitations.

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206FRE07113RL and ERA-8AEB1130V maintain Active product status with full ROHS3 and REACH compliance. The RT1206FRE07113RL serves as the baseline reference with standard ±1% tolerance and ±50ppm/°C temperature coefficient specifications. The ERA-8AEB1130V provides enhanced precision through ±0.1% tolerance and improved temperature stability at ±25ppm/°C, with additional AEC-Q200 automotive qualification. Selection between these parts depends on application-specific precision requirements and automotive industry certification needs rather than fundamental compatibility constraints. Both parts are electrically and mechanically interchangeable within the specified parameter boundaries.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB1130V replace RT1206FRE07113RL in existing designs?

A: Yes. Both parts share identical resistance values (113 Ohms), package format (1206), power rating (0.25W), composition (thin film), and operating temperature range (-55°C to 155°C). Physical dimensions are compatible for PCB assembly. The ERA-8AEB1130V offers tighter tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C), representing performance enhancements rather than compatibility issues.

Q: What are the dimensional differences between these parts?

A: RT1206FRE07113RL dimensions are 0.122" L × 0.063" W (3.10mm × 1.60mm) with maximum seated height of 0.026" (0.65mm). ERA-8AEB1130V dimensions are 0.126" L × 0.063" W (3.20mm × 1.60mm) with maximum seated height of 0.028" (0.70mm). Both fit the 1206 package specification; minor dimensional variations remain within standard PCB footprint tolerances.

Q: Are there compliance or certification differences?

A: Both parts are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export control. The ERA-8AEB1130V carries additional AEC-Q200 automotive qualification, which is not specified for the RT1206FRE07113RL. This qualification is relevant only for automotive applications requiring explicit AEC-Q200 certification.

Q: Which part should be selected for precision-critical applications?

A: The ERA-8AEB1130V is suitable for applications requiring tighter tolerance control (±0.1% vs ±1%) and improved temperature stability (±25ppm/°C vs ±50ppm/°C). The RT1206FRE07113RL is appropriate for general-purpose applications where standard ±1% tolerance meets functional requirements.