RT1206FRE07113KL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07113KL is a 113 kOhms ±1% 0.25W thin film chip resistor in 1206 (3216 Metric) package manufactured by YAGEO. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent resistance values, power ratings, and package dimensions meet or exceed the electrical and mechanical specifications of the original component while maintaining compatibility with standard PCB assembly processes.

Substiute Parts

RT1206FRE07113KL

YAGEOIn Stock: 1001RT1206FRE07113KL Datasheet

Current PartRFQ

ERA-8AEB1133V

Panasonic Electronic ComponentsIn Stock: 6492ERA-8AEB1133V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE07113KL is determined by the following criteria:

• Resistance value must equal 113 kOhms
• Package / Case must be 1206 (3216 Metric) to ensure PCB footprint compatibility
• Power rating must be equal to or greater than 0.25W
• Tolerance must be equal to or tighter than ±1%
• Composition must be thin film
• Operating temperature range must encompass -55°C ~ 155°C
• RoHS3 compliance is required
• Moisture Sensitivity Level must be 1 (Unlimited)

The ERA-8AEB1133V qualifies as a direct substitute based on these parameters. It maintains identical resistance, package, power rating, and operating temperature specifications while providing improved tolerance (±0.1% versus ±1%) and enhanced temperature coefficient performance (±25ppm/°C versus ±50ppm/°C).

Parameter Comparison

Engineering Selection Recommendations

The ERA-8AEB1133V from Panasonic Electronic Components is a qualified substitute for the RT1206FRE07113KL. Both components maintain Active product status and full RoHS3 compliance. The Panasonic part provides enhanced specifications including tighter tolerance (±0.1% versus ±1%) and superior temperature coefficient stability (±25ppm/°C versus ±50ppm/°C), making it suitable for applications requiring higher precision. The ERA-8AEB1133V carries AEC-Q200 automotive qualification, which provides additional reliability assurance for demanding environments. Physical dimensions remain compatible with standard 1206 footprints, ensuring direct PCB assembly compatibility without design modification.

Frequently Asked Questions (FAQ)

Q: Can the ERA-8AEB1133V replace the RT1206FRE07113KL in existing designs?

A: Yes. Both components share identical resistance values (113 kOhms), power ratings (0.25W), package dimensions (1206), and operating temperature ranges (-55°C ~ 155°C). The ERA-8AEB1133V meets or exceeds all electrical and mechanical specifications of the original part.

Q: What are the key differences between these two resistors?

A: The primary differences are tolerance and temperature coefficient. The ERA-8AEB1133V provides ±0.1% tolerance compared to ±1%, and ±25ppm/°C temperature coefficient compared to ±50ppm/°C. The Panasonic part also includes AEC-Q200 automotive qualification. These represent performance enhancements rather than functional changes.

Q: Are there any package or footprint compatibility concerns?

A: No. Both components use the 1206 (3216 Metric) package with identical PCB footprint requirements. Physical dimensions are compatible with standard 1206 land patterns used in automated assembly processes.

Q: Do both parts meet RoHS and environmental compliance requirements?

A: Yes. Both the RT1206FRE07113KL and ERA-8AEB1133V are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited). Both are REACH Unaffected and classified under ECCN EAR99.

Q: Which part should be selected for new designs?

A: Selection depends on application requirements. For standard applications, either part is acceptable. For applications requiring higher precision or automotive-grade reliability, the ERA-8AEB1133V is the preferred choice due to its tighter tolerance and AEC-Q200 qualification.