RT1206FRE07107RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07107RL is a 107 Ohm ±1% thin film chip resistor manufactured by YAGEO in 1206 (3216 Metric) package format. This surface mount device is rated for 0.25W (1/4W) power dissipation and operates across the temperature range of -55°C to 155°C. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are identified to provide design flexibility, inventory alternatives, and performance optimization options for applications requiring this resistance value and package specification.

Substiute Parts

RT1206FRE07107RL

YAGEOIn Stock: 829RT1206FRE07107RL Datasheet

Current PartRFQ

ERA-8AEB1070V

Panasonic Electronic ComponentsIn Stock: 10034ERA-8AEB1070V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT1206FRE07107RL are qualified based on the following critical parameters:

• Identical resistance value: 107 Ohms
• Compatible package format: 1206 (3216 Metric)
• Matching power rating: 0.25W (1/4W)
• Thin film composition technology
• Operating temperature range: -55°C to 155°C minimum
• RoHS3 compliance requirement
• Tape & Reel packaging availability

The ERA-8AEB1070V from Panasonic Electronic Components qualifies as a direct substitute. While this part offers improved tolerance (±0.1% versus ±1%) and enhanced temperature coefficient performance (±25ppm/°C versus ±50ppm/°C), it maintains full compatibility across all mandatory electrical and mechanical parameters. The addition of AEC-Q200 automotive qualification provides enhanced reliability certification for applications requiring automotive-grade components.

Parameter Comparison

Engineering Selection Recommendations

The RT1206FRE07107RL and ERA-8AEB1070V are electrically and mechanically interchangeable for 107 Ohm 1206 thin film resistor applications. Both parts maintain Active product status and full RoHS3 compliance.

Selection between these parts should be based on application requirements:

The RT1206FRE07107RL is suitable for general-purpose applications where standard ±1% tolerance and ±50ppm/°C temperature coefficient performance meet design specifications.

The ERA-8AEB1070V is appropriate for applications requiring tighter tolerance control (±0.1%), improved temperature stability (±25ppm/°C), or automotive-grade reliability certification (AEC-Q200). The enhanced specifications of the ERA-8AEB1070V provide performance margin for precision analog circuits and automotive environments without compromising package compatibility or thermal operating range.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB1070V replace RT1206FRE07107RL in existing designs?

A: Yes. Both parts share identical resistance value (107 Ohms), power rating (0.25W), package format (1206), and operating temperature range (-55°C to 155°C). Physical dimensions are compatible for PCB assembly. The ERA-8AEB1070V offers superior tolerance and temperature coefficient performance, making it a direct upgrade.

Q: What are the physical dimension differences between these parts?

A: RT1206FRE07107RL dimensions are 0.122" L × 0.063" W (3.10mm × 1.60mm) with maximum seated height of 0.026" (0.65mm). ERA-8AEB1070V dimensions are 0.126" L × 0.063" W (3.20mm × 1.60mm) with maximum seated height of 0.028" (0.70mm). Both fit standard 1206 footprints with minimal dimensional variance.

Q: Are both parts available in Tape & Reel packaging?

A: Yes. Both RT1206FRE07107RL and ERA-8AEB1070V are supplied in Tape & Reel (TR) format suitable for automated assembly processes.

Q: What is the significance of AEC-Q200 qualification on the ERA-8AEB1070V?

A: AEC-Q200 is an automotive electronics qualification standard. The ERA-8AEB1070V meets this specification, indicating enhanced reliability testing and performance validation for automotive applications. This certification is not required for general industrial or consumer applications.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both parts carry MSL 1 (Unlimited) moisture sensitivity level, indicating no moisture precautions are required during storage, handling, or assembly.