RT1206FRE07102RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07102RL is a 102 Ohm thin film chip resistor manufactured by YAGEO in the 1206 (3216 Metric) package format. This component is rated for 0.25W (1/4W) power dissipation with ±1% tolerance and operates across the temperature range of -55°C to 155°C. The part maintains Active product status and is ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across the same resistance value, package format, and operating specifications while meeting or exceeding the original part's performance characteristics.

Substiute Parts

RT1206FRE07102RL

YAGEOIn Stock: 1245RT1206FRE07102RL Datasheet

Current PartRFQ

ERA-8AEB1020V

Panasonic Electronic ComponentsIn Stock: 9516ERA-8AEB1020V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE07102RL is determined by the following criteria:

• Identical resistance value: 102 Ohms
• Compatible package format: 1206 (3216 Metric)
• Matching power rating: 0.25W (1/4W) minimum
• Thin film composition for consistent performance characteristics
• Operating temperature range: -55°C to 155°C minimum
• RoHS3 compliance and MSL 1 rating
• Active product status

The ERA-8AEB1020V qualifies as a direct substitute based on these parameters. This part maintains all critical electrical and mechanical specifications while offering improved tolerance performance (±0.1% versus ±1%) and automotive-grade qualification (AEC-Q200).

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206FRE07102RL and ERA-8AEB1020V maintain Active product status and full ROHS3 compliance. The ERA-8AEB1020V provides enhanced performance characteristics through tighter tolerance specification (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C). The Panasonic part carries AEC-Q200 automotive qualification, extending its applicability to automotive-grade applications.

Physical dimensions show minor variation within the 1206 package specification, with the Panasonic part measuring 0.126" L versus 0.122" L and 0.028" height versus 0.026" height. These dimensional differences remain within standard 1206 package tolerances and do not affect PCB footprint compatibility.

Selection between these parts should be based on application requirements for tolerance precision and temperature stability. The ERA-8AEB1020V is suitable for applications requiring tighter tolerance control or automotive-grade reliability. The RT1206FRE07102RL remains appropriate for general-purpose applications where standard ±1% tolerance is acceptable.

Frequently Asked Questions (FAQ)

Q: Can the ERA-8AEB1020V directly replace the RT1206FRE07102RL on existing PCBs?

A: Yes. Both parts use the 1206 (3216 Metric) package with identical pin spacing and footprint compatibility. Minor dimensional variations fall within standard package tolerances and do not affect PCB assembly or electrical performance.

Q: What is the primary difference between these two 102 Ohm resistors?

A: The ERA-8AEB1020V offers ±0.1% tolerance compared to the RT1206FRE07102RL's ±1% tolerance, and includes AEC-Q200 automotive qualification. Temperature coefficient performance is also improved (±25ppm/°C versus ±50ppm/°C).

Q: Are both parts suitable for the same operating temperature range?

A: Yes. Both parts operate across -55°C to 155°C, meeting identical temperature specifications.

Q: Does the Panasonic part's automotive qualification affect its use in non-automotive applications?

A: No. AEC-Q200 qualification indicates enhanced reliability testing and is not restrictive for non-automotive use. The part remains fully compatible with general-purpose applications.

Q: What is the significance of the MSL 1 rating for both parts?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture control requirements. Both parts can be stored and handled without special moisture-barrier packaging or baking procedures.

Q: Are there any compliance or regulatory differences between these parts?

A: Both parts are ROHS3 compliant and REACH unaffected. No regulatory or compliance barriers exist for substitution in either direction.