RT1206FRD07287RL Equivalent & Substitute Parts

Part Overview

The RT1206FRD07287RL is a 287 Ohm ±1% thin film chip resistor manufactured by YAGEO in the 1206 (3216 Metric) package format. This surface mount device is rated for 0.25W (1/4W) power dissipation with an operating temperature range of -55°C to 155°C. The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across alternative manufacturers, particularly when enhanced tolerance or automotive-grade certifications are required.

Substiute Parts

RT1206FRD07287RL

YAGEOIn Stock: 923RT1206FRD07287RL Datasheet

Current PartRFQ

ERA-8AEB2870V

Panasonic Electronic ComponentsIn Stock: 1322ERA-8AEB2870V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The ERA-8AEB2870V from Panasonic Electronic Components qualifies as a direct substitute based on the following alignment of critical parameters:

• Identical resistance value: 287 Ohms
• Identical package format: 1206 (3216 Metric)
• Identical power rating: 0.25W (1/4W)
• Identical composition: Thin Film
• Identical temperature coefficient: ±25ppm/°C
• Identical operating temperature range: -55°C to 155°C
• Identical RoHS3 compliance status
• Identical MSL rating: 1 (Unlimited)

The ERA-8AEB2870V provides enhanced tolerance specification (±0.1% versus ±1%) and includes automotive AEC-Q200 certification, making it suitable for applications requiring higher precision or automotive-grade reliability without compromising any electrical or mechanical compatibility requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206FRD07287RL and ERA-8AEB2870V maintain active product status with full ROHS3 compliance and identical environmental ratings. The selection between these parts depends on application requirements:

The RT1206FRD07287RL is suitable for general-purpose applications where standard ±1% tolerance meets circuit specifications.

The ERA-8AEB2870V is appropriate for applications requiring tighter tolerance control (±0.1%) or automotive-grade reliability assurance through AEC-Q200 certification. The enhanced tolerance specification provides improved circuit performance in precision analog applications without introducing any mechanical or thermal incompatibilities.

Both parts are interchangeable at the PCB footprint level, with physical dimensions within acceptable assembly tolerances for standard pick-and-place equipment.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB2870V replace RT1206FRD07287RL in existing designs?

A: Yes. Both parts share identical package dimensions (1206), resistance value (287 Ohms), power rating (0.25W), and operating temperature range (-55°C to 155°C). PCB footprints and circuit performance are fully compatible.

Q: What is the primary difference between these two parts?

A: The ERA-8AEB2870V provides ±0.1% tolerance compared to the RT1206FRD07287RL's ±1% tolerance, and includes AEC-Q200 automotive certification. All other electrical and mechanical specifications are identical.

Q: Are there any size or mounting differences?

A: Both parts use the 1206 (3216 Metric) package. Physical dimensions are within standard assembly tolerances (RT1206FRD07287RL: 3.10mm × 1.60mm; ERA-8AEB2870V: 3.20mm × 1.60mm), presenting no practical differences for standard reflow soldering processes.

Q: Which part should be selected for automotive applications?

A: The ERA-8AEB2870V includes AEC-Q200 certification and is the appropriate choice for automotive-grade reliability requirements.

Q: Do both parts meet RoHS compliance requirements?

A: Yes. Both the RT1206FRD07287RL and ERA-8AEB2870V are ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1).