RT1206DRE0723K2L Equivalent & Substitute Parts

Part Overview

The RT1206DRE0723K2L is a 23.2 kOhms ±0.5% thin film chip resistor in 1206 (3216 Metric) package rated for 0.25W (1/4W) power dissipation. Manufactured by YAGEO, this component is actively produced and ROHS3 compliant. Substitute parts are identified to address applications requiring tighter tolerance specifications, enhanced automotive qualification, or alternative sourcing strategies while maintaining electrical and mechanical compatibility.

Substiute Parts

RT1206DRE0723K2L

YAGEOIn Stock: 964RT1206DRE0723K2L Datasheet

Current PartRFQ

RT1206BRD0723K2L

YAGEOIn Stock: 2864RT1206BRD0723K2L Datasheet

UpgradeRFQ

ERA-8AEB2322V

Panasonic Electronic ComponentsIn Stock: 7396ERA-8AEB2322V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT1206DRE0723K2L are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Resistance value: 23.2 kOhms
• Power rating: 0.25W (1/4W) minimum
• Operating temperature range: -55°C ~ 155°C minimum
• Package: 1206 (3216 Metric)
• Composition: Thin Film

Allowable Variations:

• Tolerance may be equal to or tighter than ±0.5%
• Temperature coefficient may be equal to or lower than ±50ppm/°C
• Physical dimensions may vary within standard 1206 package specifications
• Additional certifications (e.g., AEC-Q200) are permissible enhancements

Excluded Criteria:

• Resistance value deviation
• Power rating reduction
• Temperature range reduction
• Package type change

Parameter Comparison

Engineering Selection Recommendations

RT1206BRD0723K2L (YAGEO): This substitute provides tighter tolerance (±0.1% vs. ±0.5%) and improved temperature coefficient (±25ppm/°C vs. ±50ppm/°C) while maintaining identical package, power rating, and operating temperature specifications. Selection is appropriate for applications requiring enhanced precision without automotive qualification requirements.

ERA-8AEB2322V (Panasonic Electronic Components): This substitute offers equivalent electrical performance to RT1206BRD0723K2L with additional AEC-Q200 automotive qualification. Physical dimensions vary slightly within 1206 package tolerance (0.126" L vs. 0.122" L; 0.028" H vs. 0.026" H). Selection is appropriate for automotive applications or where AEC-Q200 certification is mandated.

All substitute parts maintain ROHS3 compliance, unlimited moisture sensitivity rating, and active product status.

Frequently Asked Questions (FAQ)

Q: Can RT1206BRD0723K2L directly replace RT1206DRE0723K2L?

A: Yes. Both components share identical resistance value (23.2 kOhms), power rating (0.25W), package (1206), and operating temperature range (-55°C ~ 155°C). RT1206BRD0723K2L provides superior tolerance and temperature coefficient specifications, making it a direct upgrade.

Q: What is the difference between RT1206BRD0723K2L and ERA-8AEB2322V?

A: Both offer ±0.1% tolerance and ±25ppm/°C temperature coefficient. ERA-8AEB2322V includes AEC-Q200 automotive qualification and has slightly larger physical dimensions (0.126" L x 0.028" H vs. 0.122" L x 0.026" H). Selection depends on automotive requirement and PCB layout constraints.

Q: Are physical dimension variations between ERA-8AEB2322V and RT1206DRE0723K2L critical?

A: Dimension variations fall within standard 1206 package tolerance. PCB footprint compatibility is maintained. Verify specific layout constraints if height clearance is limited.

Q: Can these substitutes be used interchangeably in production?

A: Yes, provided the application does not require the original part's specific tolerance or certification. Confirm with design documentation whether tighter tolerance (±0.1%) or AEC-Q200 qualification introduces cost or supply chain considerations.

Q: Is AEC-Q200 qualification necessary for non-automotive applications?

A: No. AEC-Q200 is an automotive industry standard. For non-automotive applications, RT1206BRD0723K2L provides equivalent electrical performance without automotive certification overhead.