RT1206CRE07910RL Equivalent & Substitute Parts

Part Overview

The RT1206CRE07910RL is a 910 Ohms ±0.25% thin film chip resistor in 1206 (3216 Metric) package manufactured by YAGEO. This surface mount device is rated for 0.25W (1/4W) power dissipation with an operating temperature range of -55°C to 155°C. The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and regulatory compliance can be maintained while potentially offering improved specifications or enhanced availability.

Substiute Parts

RT1206CRE07910RL

YAGEOIn Stock: 1087RT1206CRE07910RL Datasheet

Current PartRFQ

ERA-8AEB911V

Panasonic Electronic ComponentsIn Stock: 19562ERA-8AEB911V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206CRE07910RL is determined by the following critical parameters:

• Resistance value must be 910 Ohms
• Tolerance must be equal to or tighter than ±0.25%
• Power rating must be 0.25W or greater
• Package must be 1206 (3216 Metric)
• Composition must be thin film
• Operating temperature range must encompass -55°C to 155°C
• RoHS3 compliance is required
• MSL rating must be 1 or equivalent

The ERA-8AEB911V from Panasonic Electronic Components meets all substitution criteria with improved tolerance specification (±0.1%) and automotive-grade qualification (AEC-Q200).

Parameter Comparison

Engineering Selection Recommendations

The ERA-8AEB911V is a direct substitute for the RT1206CRE07910RL with enhanced specifications. Both parts maintain ROHS3 compliance and MSL 1 rating. The Panasonic part offers tighter tolerance (±0.1% versus ±0.25%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), making it suitable for applications requiring higher precision. The ERA-8AEB911V carries AEC-Q200 automotive qualification, which is applicable in automotive and high-reliability applications. Physical dimensions are compatible with standard 1206 footprints, though minor dimensional variations exist within manufacturing tolerances.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB911V replace RT1206CRE07910RL in existing designs?

A: Yes. Both parts share identical resistance value, power rating, package type, and operating temperature range. The ERA-8AEB911V meets or exceeds all electrical specifications of the RT1206CRE07910RL.

Q: What are the key differences between these parts?

A: The ERA-8AEB911V provides tighter tolerance (±0.1% versus ±0.25%), lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), and AEC-Q200 automotive qualification. Physical dimensions vary slightly within standard manufacturing tolerances.

Q: Are there any PCB layout considerations when substituting?

A: Both parts use the 1206 (3216 Metric) package. Standard 1206 footprints accommodate both components. Verify that your PCB design allows for the maximum seated height of 0.70mm for the ERA-8AEB911V versus 0.65mm for the RT1206CRE07910RL.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (unlimited) moisture sensitivity rating. The ERA-8AEB911V additionally qualifies to AEC-Q200 automotive standards.

Q: Which part should be selected for new designs?

A: Selection depends on application requirements. For general-purpose applications, either part is acceptable. For automotive or high-reliability applications, the ERA-8AEB911V is preferred due to AEC-Q200 qualification and superior tolerance specifications.