RT1206CRE07820RL Equivalent & Substitute Parts

Part Overview

The RT1206CRE07820RL is a 1206 (3216 Metric) thin film chip resistor manufactured by YAGEO, rated at 820 Ohms with ±0.25% tolerance and 0.25W power handling. This component is classified as Active and fully compliant with ROHS3 and REACH standards. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and environmental ratings can be maintained while potentially offering improved specifications or enhanced reliability features for specific application requirements.

Substiute Parts

RT1206CRE07820RL

YAGEOIn Stock: 786RT1206CRE07820RL Datasheet

Current PartRFQ

ERA-8AEB821V

Panasonic Electronic ComponentsIn Stock: 8468ERA-8AEB821V Datasheet

UpgradeRFQ

RG3216P-8200-B-T1

SusumuIn Stock: 1849RG3216P-8200-B-T1 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT1206CRE07820RL are qualified based on the following mandatory parameters:

• Resistance Value: Must be 820 Ohms
• Package Type: Must be 1206 (3216 Metric) with compatible footprint dimensions
• Power Rating: Must be 0.25W (1/4W) or higher
• Composition: Must be Thin Film
• Operating Temperature Range: Must support -55°C to 155°C minimum
• Termination Count: Must be 2 terminations
• Compliance: Must maintain ROHS3 and REACH compliance

The identified substitute parts meet or exceed these core parameters. Tolerance improvements and additional certifications (such as AEC-Q200 automotive qualification) represent enhanced specifications rather than functional requirements for substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain Active product status and full compliance with ROHS3 and REACH regulations. The RT1206CRE07820RL serves as the baseline reference component.

ERA-8AEB821V (Panasonic) provides improved tolerance specification (±0.1% versus ±0.25%) and reduced temperature coefficient (±25ppm/°C versus ±50ppm/°C). This part carries AEC-Q200 automotive qualification, indicating enhanced reliability screening and qualification for automotive applications.

RG3216P-8200-B-T1 (Susumu) offers the same tolerance and temperature coefficient improvements as the Panasonic option, with additional anti-sulfur protection. This part also carries AEC-Q200 automotive qualification. Physical dimensions show a reduced seated height (0.020" versus 0.026" for the original), which may be relevant for space-constrained applications.

Selection between these parts depends on application-specific requirements for tolerance precision, temperature stability, and automotive qualification needs rather than functional compatibility.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB821V or RG3216P-8200-B-T1 be used as direct replacements for RT1206CRE07820RL?

A: Yes. Both substitute parts maintain identical resistance value (820 Ohms), power rating (0.25W), package type (1206), composition (thin film), operating temperature range (-55°C to 155°C), and termination configuration (2 terminations). All three parts are ROHS3 and REACH compliant with MSL 1 rating.

Q: What are the key differences between the substitute parts?

A: The primary differences are tolerance specification (±0.1% for both substitutes versus ±0.25% for the original), temperature coefficient (±25ppm/°C for both substitutes versus ±50ppm/°C for the original), and certifications. Both substitutes include AEC-Q200 automotive qualification. RG3216P-8200-B-T1 includes anti-sulfur protection and has a lower seated height (0.020" versus 0.026").

Q: Are there any mechanical compatibility concerns when substituting these parts?

A: All three parts use the 1206 (3216 Metric) package with identical footprint specifications. Physical dimensions are nearly identical, with RG3216P-8200-B-T1 showing a slightly reduced seated height (0.020" maximum versus 0.026" for the original). This difference is negligible for standard PCB assembly and does not affect footprint compatibility.

Q: Which substitute part should be selected for automotive applications?

A: Both ERA-8AEB821V and RG3216P-8200-B-T1 carry AEC-Q200 automotive qualification. Selection between these two depends on whether anti-sulfur protection is required for the specific application environment.

Q: Do the substitute parts require any design changes?

A: No design changes are required. All parts are pin-compatible with identical electrical ratings and package footprints. Substitution is a direct component swap at the PCB assembly level.