RT1206CRE07715RL Equivalent & Substitute Parts

Part Overview

The RT1206CRE07715RL is a 715 Ohm thin film chip resistor manufactured by YAGEO in the 1206 (3216 Metric) package format. This component is rated for 0.25W power dissipation with ±0.25% tolerance and operates across the -55°C to 155°C temperature range. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent resistance values, package formats, and power ratings are maintained while offering improved electrical characteristics or enhanced reliability certifications.

Substiute Parts

RT1206CRE07715RL

YAGEOIn Stock: 1112RT1206CRE07715RL Datasheet

Current PartRFQ

ERA-8AEB7150V

Panasonic Electronic ComponentsIn Stock: 6425ERA-8AEB7150V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The ERA-8AEB7150V qualifies as a direct substitute based on the following alignment of critical parameters:

• Resistance Value: Both parts specify 715 Ohms
• Package Format: Both use 1206 (3216 Metric) surface mount package
• Power Rating: Both rated at 0.25W (1/4W)
• Composition: Both employ thin film resistor technology
• Operating Temperature Range: Both support -55°C ~ 155°C
• Compliance: Both maintain RoHS3 compliance and REACH Unaffected status
• Moisture Sensitivity: Both rated MSL 1 (Unlimited)

The ERA-8AEB7150V provides enhanced electrical performance through tighter tolerance (±0.1% versus ±0.25%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), with additional AEC-Q200 automotive qualification.

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206CRE07715RL and ERA-8AEB7150V maintain Active product status with full RoHS3 compliance and REACH Unaffected designation, ensuring regulatory compliance for current and future applications. The ERA-8AEB7150V incorporates AEC-Q200 automotive qualification, providing enhanced reliability documentation suitable for automotive and mission-critical applications. Selection between these parts should be based on application-specific requirements for tolerance precision and temperature stability, with the ERA-8AEB7150V offering superior performance characteristics in these areas.

Frequently Asked Questions (FAQ)

Q: Can the ERA-8AEB7150V directly replace the RT1206CRE07715RL in existing designs?

A: Yes. Both parts share identical resistance values (715 Ohms), power ratings (0.25W), package formats (1206), and operating temperature ranges (-55°C ~ 155°C). Physical dimensions differ slightly (maximum height 0.65mm versus 0.70mm), requiring verification of PCB clearance in space-constrained layouts.

Q: What are the tolerance differences between these parts?

A: The RT1206CRE07715RL specifies ±0.25% tolerance, while the ERA-8AEB7150V provides tighter ±0.1% tolerance. Applications requiring precision resistor networks or tight impedance matching benefit from the ERA-8AEB7150V specification.

Q: How do temperature coefficients affect circuit performance?

A: The RT1206CRE07715RL exhibits ±50ppm/°C temperature coefficient, while the ERA-8AEB7150V provides ±25ppm/°C. In temperature-sensitive applications spanning the full -55°C ~ 155°C operating range, the ERA-8AEB7150V delivers superior resistance stability.

Q: Are both parts suitable for automotive applications?

A: The ERA-8AEB7150V carries AEC-Q200 automotive qualification. The RT1206CRE07715RL does not specify automotive certification. For automotive designs, the ERA-8AEB7150V is the appropriate selection.

Q: What is the moisture sensitivity rating for both parts?

A: Both parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions and unlimited shelf life under standard storage conditions.