RT1206CRE07511RL Equivalent & Substitute Parts

Part Overview

The RT1206CRE07511RL is a 511 Ohms ±0.25% thin film chip resistor in 1206 (3216 Metric) package format, rated for 0.25W power dissipation. This component is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent resistance values, package dimensions, and power ratings are maintained while allowing variations in tolerance, temperature coefficient, and manufacturer-specific certifications.

Substiute Parts

RT1206CRE07511RL

YAGEOIn Stock: 861RT1206CRE07511RL Datasheet

Current PartRFQ

RT1206BRD07511RL

YAGEOIn Stock: 2890RT1206BRD07511RL Datasheet

UpgradeRFQ

ERA-8AEB5110V

Panasonic Electronic ComponentsIn Stock: 3225ERA-8AEB5110V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206CRE07511RL is determined by the following mandatory parameters:

• Resistance value: 511 Ohms (exact match required)
• Package / Case: 1206 (3216 Metric) (exact match required)
• Power rating: 0.25W minimum
• Composition: Thin Film
• Operating temperature range: -55°C ~ 155°C minimum coverage
• RoHS compliance: ROHS3 Compliant

Tolerance and temperature coefficient may vary between substitute parts. Manufacturer-specific certifications (such as AEC-Q200 for automotive applications) represent enhanced specifications and do not disqualify substitution in non-automotive contexts.

Parameter Comparison

Engineering Selection Recommendations

RT1206BRD07511RL represents a direct upgrade path within the YAGEO RT series, offering improved tolerance (±0.1% versus ±0.25%) and reduced temperature coefficient (±25ppm/°C versus ±50ppm/°C) while maintaining identical package dimensions and power rating. Both components share ROHS3 compliance and unlimited moisture sensitivity rating.

ERA-8AEB5110V provides equivalent electrical performance with AEC-Q200 automotive qualification. Physical dimensions show minor variation: length increases from 3.10mm to 3.20mm and seated height from 0.65mm to 0.70mm. This component is suitable for applications requiring automotive-grade reliability certification.

All three parts maintain Active product status and full availability in inventory.

Frequently Asked Questions (FAQ)

Q: Can RT1206BRD07511RL replace RT1206CRE07511RL in any application?

A: Yes. Both components share identical resistance value, power rating, package dimensions, and operating temperature range. RT1206BRD07511RL offers tighter tolerance and lower temperature coefficient, making it suitable for applications with stricter accuracy requirements.

Q: What are the physical differences between ERA-8AEB5110V and the YAGEO parts?

A: ERA-8AEB5110V has slightly larger dimensions: length 3.20mm (versus 3.10mm) and seated height 0.70mm (versus 0.65mm). These differences must be evaluated against PCB layout constraints and available mounting space.

Q: Is ERA-8AEB5110V suitable for non-automotive applications?

A: Yes. AEC-Q200 certification represents enhanced qualification standards and does not restrict use in general industrial or consumer applications. The component meets all standard RoHS and REACH requirements.

Q: What determines substitution compatibility for 1206 thin film resistors?

A: Substitution requires matching resistance value, package type (1206), power rating (0.25W minimum), composition (thin film), and operating temperature range (-55°C to 155°C). Tolerance and temperature coefficient variations are permissible.

Q: Are all three parts available in Tape & Reel packaging?

A: Yes. All three components are supplied in Tape & Reel (TR) format suitable for automated assembly processes.