RT1206CRE07510RL Equivalent & Substitute Parts

Part Overview

The RT1206CRE07510RL is a 510 Ohm thin film chip resistor manufactured by YAGEO in the 1206 (3216 Metric) package format. This component is rated for 0.25W power dissipation with ±0.25% tolerance and operates across the -55°C to 155°C temperature range. The part maintains Active product status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when they maintain equivalent electrical performance within the specified resistance value, power rating, and package dimensions while meeting or exceeding the original part's tolerance and environmental specifications.

Substiute Parts

RT1206CRE07510RL

YAGEOIn Stock: 1001RT1206CRE07510RL Datasheet

Current PartRFQ

ERA-8AEB511V

Panasonic Electronic ComponentsIn Stock: 12382ERA-8AEB511V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206CRE07510RL is determined by the following criteria:

• Resistance value must be 510 Ohms
• Power rating must be 0.25W minimum
• Package must be 1206 (3216 Metric)
• Composition must be thin film
• Operating temperature range must encompass -55°C to 155°C
• Tolerance must be equal to or better than ±0.25%
• RoHS3 compliance required
• MSL rating must be 1 (Unlimited)

The ERA-8AEB511V qualifies as a direct substitute based on these parameters. This part exceeds the original specification in tolerance (±0.1% versus ±0.25%) and temperature coefficient performance (±25ppm/°C versus ±50ppm/°C), while maintaining identical resistance, power rating, package format, and environmental compliance.

Parameter Comparison

Engineering Selection Recommendations

The ERA-8AEB511V serves as a qualified substitute for the RT1206CRE07510RL in applications requiring 510 Ohm thin film resistors in 1206 package format. Both parts maintain Active product status and full ROHS3 compliance.

The ERA-8AEB511V provides enhanced performance characteristics through tighter tolerance specification (±0.1% versus ±0.25%) and superior temperature coefficient stability (±25ppm/°C versus ±50ppm/°C). The Panasonic component carries AEC-Q200 automotive qualification, making it suitable for automotive and high-reliability applications where the original part may be specified.

Physical dimensions show minor variation: the ERA-8AEB511V measures 3.20mm length and 0.70mm maximum seated height compared to the RT1206CRE07510RL at 3.10mm length and 0.65mm maximum seated height. These dimensional differences remain within standard 1206 package tolerances and do not affect PCB layout compatibility.

Frequently Asked Questions (FAQ)

Q: Can the ERA-8AEB511V replace the RT1206CRE07510RL in existing designs?

A: Yes. Both parts share identical resistance value (510 Ohms), power rating (0.25W), package format (1206), and operating temperature range (-55°C to 155°C). The ERA-8AEB511V meets or exceeds all electrical specifications of the original part.

Q: What are the tolerance differences between these parts?

A: The RT1206CRE07510RL specifies ±0.25% tolerance, while the ERA-8AEB511V provides ±0.1% tolerance. The Panasonic part offers tighter tolerance, resulting in more precise resistance values across production batches.

Q: Are there physical compatibility concerns?

A: Both parts use the 1206 (3216 Metric) package. Minor dimensional variations exist (length: 3.10mm versus 3.20mm; height: 0.65mm versus 0.70mm), but these fall within standard package tolerances and present no PCB layout or assembly issues.

Q: What is the significance of AEC-Q200 certification on the ERA-8AEB511V?

A: AEC-Q200 is an automotive qualification standard. The ERA-8AEB511V carries this certification, making it suitable for automotive applications. The RT1206CRE07510RL does not carry this designation.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both the RT1206CRE07510RL and ERA-8AEB511V carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage or handling.

Q: Which part should be selected for new designs?

A: Selection depends on application requirements. For standard applications, either part is acceptable. For automotive or high-reliability applications requiring tighter tolerance and superior temperature stability, the ERA-8AEB511V is the preferred choice.