RT1206CRE07340RL Equivalent & Substitute Parts

Part Overview

The RT1206CRE07340RL is a 340 Ohm thin film chip resistor manufactured by YAGEO in the 1206 (3216 Metric) package format. This component is rated for 0.25W power dissipation with ±0.25% tolerance and operates across the -55°C to 155°C temperature range. The part maintains Active product status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent resistance values, package formats, power ratings, and operating temperature ranges are maintained while allowing variations in tolerance specifications and temperature coefficients within acceptable engineering parameters.

Substiute Parts

RT1206CRE07340RL

YAGEOIn Stock: 1029RT1206CRE07340RL Datasheet

Current PartRFQ

ERA-8AEB3400V

Panasonic Electronic ComponentsIn Stock: 1637ERA-8AEB3400V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206CRE07340RL is determined by the following critical parameters:

• Resistance value: 340 Ohms (exact match required)
• Package format: 1206 (3216 Metric) (exact match required)
• Power rating: 0.25W minimum (equal or greater acceptable)
• Operating temperature range: -55°C to 155°C minimum (equal or greater range acceptable)
• Composition: Thin film construction
• Regulatory compliance: ROHS3 and REACH status alignment

The ERA-8AEB3400V qualifies as a substitute based on matching resistance, package, power rating, operating temperature range, and thin film composition. Tolerance and temperature coefficient variations are within acceptable engineering parameters for this product category.

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206CRE07340RL and ERA-8AEB3400V maintain Active product status with full ROHS3 compliance and REACH unaffected designation. The ERA-8AEB3400V provides improved tolerance specification (±0.1% versus ±0.25%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), with additional AEC-Q200 automotive qualification. Selection between these parts depends on application-specific requirements for tolerance precision and automotive compliance certification.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB3400V replace RT1206CRE07340RL in existing designs?

A: Yes. Both parts share identical resistance values, package formats, power ratings, and operating temperature ranges. The ERA-8AEB3400V offers tighter tolerance and lower temperature coefficient specifications.

Q: What is the significance of the AEC-Q200 rating on the ERA-8AEB3400V?

A: AEC-Q200 is an automotive qualification standard. This certification is present on the ERA-8AEB3400V but not specified for the RT1206CRE07340RL. Applications requiring automotive-grade components should reference this distinction.

Q: Are the physical dimensions compatible between these parts?

A: Both parts use the 1206 (3216 Metric) package. The RT1206CRE07340RL measures 0.122" L x 0.063" W with 0.026" maximum seated height. The ERA-8AEB3400V measures 0.126" L x 0.063" W with 0.028" maximum seated height. These minor dimensional variations remain within standard 1206 package tolerances and are compatible with standard PCB footprints.

Q: Do both parts have identical moisture sensitivity ratings?

A: Yes. Both the RT1206CRE07340RL and ERA-8AEB3400V carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.

Q: What regulatory compliance applies to both parts?

A: Both parts are ROHS3 compliant and REACH unaffected, meeting current environmental and hazardous substance regulations.