RT1206CRE07232RL Equivalent & Substitute Parts

Part Overview

The RT1206CRE07232RL is a 232 Ohm thin film chip resistor manufactured by YAGEO in the 1206 (3216 Metric) package format. This component is rated for 0.25W power dissipation with ±0.25% tolerance and operates across the temperature range of -55°C to 155°C. The part maintains Active product status and is ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across the same resistance value, package format, and operating specifications while meeting or exceeding the original part's performance characteristics.

Substiute Parts

RT1206CRE07232RL

YAGEOIn Stock: 877RT1206CRE07232RL Datasheet

Current PartRFQ

ERA-8AEB2320V

Panasonic Electronic ComponentsIn Stock: 4700ERA-8AEB2320V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206CRE07232RL is determined by the following criteria:

• Resistance value must be 232 Ohms
• Package format must be 1206 (3216 Metric)
• Power rating must be 0.25W minimum
• Composition must be thin film
• Operating temperature range must encompass -55°C to 155°C
• Tolerance must be equal to or tighter than ±0.25%
• RoHS3 compliance required
• MSL rating must be 1 or equivalent

The ERA-8AEB2320V meets all substitution criteria with improved tolerance specification (±0.1%) and enhanced temperature coefficient performance (±25ppm/°C versus ±50ppm/°C).

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206CRE07232RL and ERA-8AEB2320V are Active products with full ROHS3 compliance and unlimited moisture sensitivity ratings. The ERA-8AEB2320V provides tighter tolerance specification (±0.1% versus ±0.25%) and improved temperature coefficient stability (±25ppm/°C versus ±50ppm/°C) while maintaining identical package format, power rating, and operating temperature range.

The ERA-8AEB2320V carries AEC-Q200 automotive qualification, which represents an enhanced reliability standard applicable to automotive applications. Selection between these parts should be based on application-specific tolerance requirements and whether automotive-grade qualification is necessary for the end application.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB2320V be used as a direct replacement for RT1206CRE07232RL?

A: Yes. Both parts share identical resistance value (232 Ohms), package format (1206), power rating (0.25W), composition (thin film), and operating temperature range (-55°C to 155°C). The ERA-8AEB2320V meets or exceeds all electrical specifications of the RT1206CRE07232RL.

Q: What are the physical dimension differences between these parts?

A: RT1206CRE07232RL dimensions are 0.122" L x 0.063" W (3.10mm x 1.60mm) with maximum seated height of 0.026" (0.65mm). ERA-8AEB2320V dimensions are 0.126" L x 0.063" W (3.20mm x 1.60mm) with maximum seated height of 0.028" (0.70mm). Both fit the 1206 package specification; minor dimensional variations are within standard package tolerances.

Q: Does the improved tolerance of ERA-8AEB2320V affect circuit performance?

A: The ERA-8AEB2320V tolerance of ±0.1% is tighter than the RT1206CRE07232RL tolerance of ±0.25%, meaning the actual resistance value will be closer to the nominal 232 Ohm specification. This represents improved performance for applications requiring precise resistance values.

Q: What is the significance of AEC-Q200 qualification on the ERA-8AEB2320V?

A: AEC-Q200 is an automotive industry standard qualification that certifies component reliability under automotive operating conditions. This qualification is relevant only if the application requires automotive-grade components.

Q: Are both parts available in the same packaging format?

A: Yes. Both RT1206CRE07232RL and ERA-8AEB2320V are supplied in Tape & Reel (TR) packaging suitable for automated assembly processes.