RT1206CRE07182RL Equivalent & Substitute Parts

Part Overview

The RT1206CRE07182RL is a 182 Ohm thin film chip resistor manufactured by YAGEO in the 1206 (3216 Metric) package format. This component is rated for 0.25W power dissipation with ±0.25% tolerance and operates across the temperature range of -55°C to 155°C. The part maintains Active product status and is ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent resistance values, package formats, power ratings, and operating temperature ranges align with the original specification, enabling direct replacement in circuit applications.

Substiute Parts

RT1206CRE07182RL

YAGEOIn Stock: 828RT1206CRE07182RL Datasheet

Current PartRFQ

ERA-8AEB1820V

Panasonic Electronic ComponentsIn Stock: 4897ERA-8AEB1820V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206CRE07182RL is determined by the following criteria:

• Resistance value must equal 182 Ohms
• Package format must be 1206 (3216 Metric)
• Power rating must be 0.25W or greater
• Operating temperature range must encompass -55°C to 155°C
• Composition must be thin film
• RoHS3 compliance required
• MSL rating must be 1 or equivalent

The ERA-8AEB1820V from Panasonic Electronic Components qualifies as a direct substitute based on these parameters. While the ERA-8AEB1820V offers improved tolerance (±0.1% versus ±0.25%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), these represent performance enhancements rather than deviations from the original specification.

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206CRE07182RL and ERA-8AEB1820V maintain Active product status and satisfy ROHS3 compliance requirements. The ERA-8AEB1820V carries AEC-Q200 automotive qualification, which provides additional reliability assurance for applications requiring automotive-grade components. Selection between these parts should be based on application requirements and supply chain considerations rather than electrical performance, as both components meet the specified operating parameters.

Frequently Asked Questions (FAQ)

Q: Can the ERA-8AEB1820V replace the RT1206CRE07182RL in existing designs?

A: Yes. Both components share identical resistance values, power ratings, package formats, and operating temperature ranges. The ERA-8AEB1820V's improved tolerance and lower temperature coefficient represent performance enhancements compatible with applications designed for the original part.

Q: What is the significance of the ±0.1% tolerance on the ERA-8AEB1820V compared to ±0.25% on the RT1206CRE07182RL?

A: The ERA-8AEB1820V provides tighter tolerance specifications, resulting in more precise resistance values. This enhancement does not prevent substitution; it only improves measurement accuracy within the circuit.

Q: Are the physical dimensions compatible between these two parts?

A: Both components use the 1206 (3216 Metric) package. The RT1206CRE07182RL measures 0.122" L x 0.063" W with 0.026" maximum seated height, while the ERA-8AEB1820V measures 0.126" L x 0.063" W with 0.028" maximum seated height. These minor dimensional variations remain within standard PCB footprint tolerances for 1206 packages.

Q: What does AEC-Q200 qualification mean for the ERA-8AEB1820V?

A: AEC-Q200 is an automotive industry standard qualification that certifies component reliability under automotive operating conditions. This certification is optional for general-purpose applications but required for automotive-grade designs.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the RT1206CRE07182RL and ERA-8AEB1820V are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity ratings.