RT1206CRE0715RL Equivalent & Substitute Parts

Part Overview

The RT1206CRE0715RL is a 15 Ohm ±0.25% thin film chip resistor in 1206 (3216 Metric) package format, rated for 0.25W power dissipation. This component is actively manufactured by YAGEO and maintains ROHS3 compliance with unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and environmental ratings can be maintained across the same package footprint and operating temperature range.

Substiute Parts

RT1206CRE0715RL

YAGEOIn Stock: 840RT1206CRE0715RL Datasheet

Current PartRFQ

RT1206BRD0715RL

YAGEOIn Stock: 7076RT1206BRD0715RL Datasheet

UpgradeRFQ

RNCF1206BKC15R0

Stackpole Electronics IncIn Stock: 9544RNCF1206BKC15R0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Mandatory Compatibility Parameters:

• Resistance value: 15 Ohms (exact match required)
• Package format: 1206 (3216 Metric) (mechanical and electrical footprint compatibility)
• Operating temperature range: -55°C to 155°C (minimum requirement)
• Composition: Thin Film (electrical performance characteristics)
• RoHS3 compliance and MSL 1 rating (regulatory and environmental requirements)

Allowable Variations:

• Tolerance: May be equal to or tighter than ±0.25%
• Power rating: May be equal to or greater than 0.25W
• Temperature coefficient: May differ within specified operating range
• Certifications: Additional qualifications (such as AEC-Q200) are permissible

Two substitute parts meet these criteria and are listed below.

Parameter Comparison

Engineering Selection Recommendations

RT1206BRD0715RL (YAGEO Upgrade): This part provides tighter tolerance (±0.1% versus ±0.25%) and improved temperature coefficient (±25ppm/°C versus ±50ppm/°C) while maintaining identical power rating, package dimensions, and operating temperature range. Direct substitution is electrically and mechanically compatible with no design modifications required.

RNCF1206BKC15R0 (Stackpole Electronics Inc): This part offers increased power rating (0.333W versus 0.25W) and AEC-Q200 automotive qualification. Dimensional variation is minimal (3.05mm x 1.55mm versus 3.10mm x 1.60mm), remaining within standard PCB footprint tolerances for 1206 packages. Selection is appropriate for applications requiring automotive-grade reliability or higher thermal headroom.

Both substitute parts maintain full ROHS3 compliance, unlimited MSL rating, and identical operating temperature specifications as the main part.

Frequently Asked Questions (FAQ)

Q: Can RT1206BRD0715RL replace RT1206CRE0715RL in all applications?

A: Yes. The substitute part maintains identical resistance, power rating, package format, and operating temperature range. The tighter tolerance and improved temperature coefficient represent performance enhancements with no compatibility concerns.

Q: Is RNCF1206BKC15R0 suitable for non-automotive applications?

A: Yes. AEC-Q200 certification indicates enhanced reliability screening and is not restrictive for general-purpose use. The higher power rating (0.333W) and identical operating temperature range provide equivalent or superior performance.

Q: Are there dimensional concerns with RNCF1206BKC15R0?

A: Dimensional differences (3.05mm x 1.55mm versus 3.10mm x 1.60mm) are within standard PCB footprint tolerances for 1206 packages. No design modifications are required for standard manufacturing processes.

Q: What is the primary difference between the two substitute parts?

A: RT1206BRD0715RL prioritizes tolerance and temperature stability improvements from the same manufacturer. RNCF1206BKC15R0 adds automotive qualification and increased power rating from an alternative manufacturer.

Q: Do all three parts share the same moisture sensitivity level?

A: Yes. All parts carry MSL 1 (Unlimited) rating, indicating no moisture-related handling restrictions during storage or assembly.