RT1206CRE07150RL Equivalent & Substitute Parts

Part Overview

The RT1206CRE07150RL is a 150 Ohm thin film chip resistor in 1206 (3216 Metric) package manufactured by YAGEO. This surface mount device delivers 0.25W power rating with ±0.25% tolerance and operates across -55°C to 155°C. The part is Active status and ROHS3 compliant with MSL 1 rating, making it suitable for general industrial and commercial applications requiring precision resistive elements.

Substitute parts are identified when equivalent resistance values, power ratings, package dimensions, and thermal operating ranges are maintained while offering improved tolerance specifications or enhanced certifications.

Substiute Parts

RT1206CRE07150RL

YAGEOIn Stock: 1080RT1206CRE07150RL Datasheet

Current PartRFQ

RT1206BRD07150RL

YAGEOIn Stock: 24191RT1206BRD07150RL Datasheet

UpgradeRFQ

ERA-8AEB151V

Panasonic Electronic ComponentsIn Stock: 29420ERA-8AEB151V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206CRE07150RL is determined by the following criteria:

• Identical resistance value: 150 Ohms
• Equal or superior tolerance specification: ±0.25% or tighter
• Matching or exceeding power rating: 0.25W minimum
• Compatible package: 1206 (3216 Metric) form factor
• Thin film composition maintained
• Operating temperature range: -55°C to 155°C minimum
• RoHS3 compliance required
• MSL 1 rating maintained

Two substitute parts meet these criteria: RT1206BRD07150RL (YAGEO, upgraded tolerance ±0.1%) and ERA-8AEB151V (Panasonic, upgraded tolerance ±0.1% with automotive AEC-Q200 qualification).

Parameter Comparison

Engineering Selection Recommendations

RT1206BRD07150RL serves as a direct upgrade within the YAGEO RT series, offering improved tolerance (±0.1% versus ±0.25%) and reduced temperature coefficient (±25ppm/°C versus ±50ppm/°C) while maintaining identical package, power rating, and operating temperature range. This part is suitable for applications requiring tighter resistance accuracy without automotive qualification requirements.

ERA-8AEB151V provides equivalent electrical performance with additional AEC-Q200 automotive qualification. The Panasonic part maintains ±0.1% tolerance and ±25ppm/°C temperature coefficient. Dimensional variation exists: ERA-8AEB151V measures 0.126" L × 0.063" W (3.20mm × 1.60mm) with 0.028" maximum seated height, compared to RT1206CRE07150RL at 0.122" L × 0.063" W (3.10mm × 1.60mm) with 0.026" maximum seated height. This part is specified for automotive applications requiring AEC-Q200 compliance.

Frequently Asked Questions (FAQ)

Q: Can RT1206BRD07150RL replace RT1206CRE07150RL in all applications?

A: Yes. RT1206BRD07150RL maintains identical resistance, power rating, package dimensions, and operating temperature range. The improved tolerance (±0.1% versus ±0.25%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C) make it functionally compatible for direct substitution.

Q: What is the primary difference between RT1206BRD07150RL and ERA-8AEB151V?

A: Both parts offer ±0.1% tolerance and ±25ppm/°C temperature coefficient. The key distinction is ERA-8AEB151V carries AEC-Q200 automotive qualification. Additionally, ERA-8AEB151V has slightly larger dimensions (3.20mm × 1.60mm versus 3.10mm × 1.60mm) and greater maximum seated height (0.028" versus 0.026").

Q: Is ERA-8AEB151V suitable for non-automotive applications?

A: Yes. AEC-Q200 certification indicates enhanced reliability and quality standards. The part is electrically and mechanically compatible with non-automotive designs and may be used where superior qualification is beneficial.

Q: Are packaging format differences significant?

A: Packaging format (Tape & Reel versus Cut Tape & Digi-Reel) affects procurement and assembly logistics but does not impact electrical or mechanical performance. Selection depends on manufacturing process requirements and inventory management practices.

Q: Do all three parts share identical MSL and RoHS compliance?

A: Yes. All three parts are MSL 1 (Unlimited) rated and ROHS3 compliant, ensuring equivalent moisture sensitivity and environmental compliance across substitution options.