RT1206CRE0710RL Equivalent & Substitute Parts

Part Overview

The RT1206CRE0710RL is a 10 Ohm ±0.25% thin film chip resistor in 1206 (3216 Metric) package format, rated for 0.25W power dissipation. This component is designed for precision applications requiring tight tolerance specifications and stable performance across the -55°C to 155°C operating temperature range. The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained while meeting or exceeding the original specifications.

Substiute Parts

RT1206CRE0710RL

YAGEOIn Stock: 777RT1206CRE0710RL Datasheet

Current PartRFQ

RT1206BRD0710RL

YAGEOIn Stock: 52798RT1206BRD0710RL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206CRE0710RL is determined by the following critical parameters:

• Resistance value: Must be 10 Ohms
• Package format: Must be 1206 (3216 Metric) for mechanical compatibility
• Power rating: Must be ≥0.25W
• Composition: Thin film construction
• Operating temperature range: Must cover -55°C to 155°C minimum
• Compliance: ROHS3 and REACH status must be maintained

The RT1206BRD0710RL qualifies as a direct substitute because it maintains identical resistance, package, power rating, and operating temperature specifications while providing improved tolerance (±0.1% vs ±0.25%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C).

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206CRE0710RL and RT1206BRD0710RL are active production components with identical ROHS3 and REACH compliance certifications. Selection between these parts should be based on application tolerance requirements:

The RT1206CRE0710RL is suitable for applications where ±0.25% tolerance meets circuit specifications. The RT1206BRD0710RL provides enhanced precision with ±0.1% tolerance and improved temperature stability (±25ppm/°C), making it appropriate for circuits requiring tighter tolerance control. Both components maintain full compatibility with 1206 package footprints and identical thermal operating ranges.

Frequently Asked Questions (FAQ)

Q: Can RT1206BRD0710RL replace RT1206CRE0710RL in existing designs?

A: Yes. The RT1206BRD0710RL is mechanically and electrically compatible. It features identical package dimensions, power rating, and operating temperature range. The improved tolerance specification (±0.1% vs ±0.25%) and lower temperature coefficient represent performance enhancements with no compatibility concerns.

Q: Are there package compatibility considerations?

A: No. Both components use the 1206 (3216 Metric) package with identical footprint dimensions (0.122" L x 0.063" W / 3.10mm x 1.60mm) and maximum seated height (0.026" / 0.65mm). PCB layout and assembly processes require no modification.

Q: What is the significance of tolerance differences?

A: The RT1206CRE0710RL maintains ±0.25% tolerance, while the RT1206BRD0710RL provides ±0.1% tolerance. This means the substitute part delivers resistance values within a narrower range around the 10 Ohm nominal value, beneficial for precision analog circuits and measurement applications.

Q: Do compliance certifications differ between these parts?

A: No. Both components carry identical ROHS3 compliance and REACH Unaffected status. MSL ratings are equivalent at Level 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: What is the temperature coefficient impact?

A: The RT1206CRE0710RL has a temperature coefficient of ±50ppm/°C, while the RT1206BRD0710RL is ±25ppm/°C. The substitute part exhibits half the resistance change per degree Celsius, providing superior stability across the -55°C to 155°C operating range.