RT1206CRE07102RL Equivalent & Substitute Parts

Part Overview

The RT1206CRE07102RL is a 102 Ohm thin film chip resistor manufactured by YAGEO in the 1206 (3216 Metric) package format. This component is rated for 0.25W power dissipation with ±0.25% tolerance and operates across the temperature range of -55°C to 155°C. The part maintains Active product status and is ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across the specified parameter set, enabling procurement flexibility and supply chain continuity.

Substiute Parts

RT1206CRE07102RL

YAGEOIn Stock: 833RT1206CRE07102RL Datasheet

Current PartRFQ

ERA-8AEB1020V

Panasonic Electronic ComponentsIn Stock: 9516ERA-8AEB1020V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The ERA-8AEB1020V qualifies as a direct substitute based on the following alignment of critical parameters:

Electrical equivalence is established through matching resistance value (102 Ohms), power rating (0.25W), package format (1206), and composition (thin film). The substitute maintains the required operating temperature range (-55°C to 155°C) and exceeds the tolerance specification with ±0.1% versus the original ±0.25%.

Mechanical compatibility is confirmed through identical package designation (1206 / 3216 Metric) and tape & reel packaging format. Physical dimensions remain within acceptable assembly tolerances.

Compliance requirements are satisfied: both parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 rating. The substitute includes AEC-Q200 automotive qualification, which represents an enhancement to the original specification without introducing incompatibility.

Parameter Comparison

Engineering Selection Recommendations

The ERA-8AEB1020V represents a qualified substitute for the RT1206CRE07102RL in applications requiring 102 Ohm thin film resistors in 1206 package format. Both components maintain Active product status and satisfy ROHS3 compliance requirements.

The substitute part offers improved tolerance specification (±0.1% versus ±0.25%) and reduced temperature coefficient (±25ppm/°C versus ±50ppm/°C), which may provide enhanced circuit stability in precision applications. The inclusion of AEC-Q200 automotive qualification on the substitute part does not restrict its use in non-automotive applications and represents specification enhancement.

Physical dimensions remain compatible within standard PCB assembly tolerances. Both components are rated for identical operating temperature range and moisture sensitivity classification, confirming suitability for equivalent environmental conditions.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB1020V be used as a direct replacement for RT1206CRE07102RL?

A: Yes. Both components share identical resistance value (102 Ohms), power rating (0.25W), package format (1206), and composition (thin film). Electrical and mechanical compatibility is confirmed across all critical parameters.

Q: What are the tolerance differences between these parts?

A: The RT1206CRE07102RL carries ±0.25% tolerance, while the ERA-8AEB1020V provides ±0.1% tolerance. The substitute offers tighter tolerance specification, which is compatible with applications designed for the original part.

Q: Are there physical dimension differences?

A: Minor dimensional variations exist within standard tolerances. RT1206CRE07102RL measures 0.122" L x 0.063" W (3.10mm x 1.60mm) with 0.026" maximum seated height. ERA-8AEB1020V measures 0.126" L x 0.063" W (3.20mm x 1.60mm) with 0.028" maximum seated height. These differences remain within PCB assembly design margins for 1206 package format.

Q: Does AEC-Q200 qualification on the substitute part affect compatibility?

A: No. AEC-Q200 automotive qualification represents an additional specification layer and does not restrict use in non-automotive applications. The substitute remains fully compatible with designs specified for the original part.

Q: Are both parts ROHS3 compliant?

A: Yes. Both RT1206CRE07102RL and ERA-8AEB1020V are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating and REACH unaffected status.

Q: What is the temperature coefficient difference?

A: The RT1206CRE07102RL has ±50ppm/°C temperature coefficient, while ERA-8AEB1020V has ±25ppm/°C. The substitute exhibits improved temperature stability, which is compatible with applications designed for the original specification.