Request Quote
(Ships tomorrow)
Equivalent & Substitute Parts for RT0816R-103-M
Part Overview
The RT0816R-103-M is a 10 kOhms ±20% thin film chip resistor manufactured by Susumu in 0603 (1608 Metric) package format with 0.063W (1/16W) power rating. This component is actively produced and widely used in general-purpose electronic applications requiring standard tolerance resistive elements. The part is ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1).
Substitute and equivalent parts are identified when design requirements demand improved tolerance specifications, enhanced temperature stability, automotive-grade reliability certifications, or alternative packaging formats while maintaining the same 10 kOhms resistance value and 0603 package footprint.
Substiute Parts
Key Parameters
| Parameter | RT0816R-103-M |
|---|---|
| Resistance Value | 10 kOhms |
| Tolerance | ±20% |
| Power Rating | 0.063W (1/16W) |
| Package / Case | 0603 (1608 Metric) |
| Composition | Thin Film |
| Temperature Coefficient | ±100ppm/°C |
| Operating Temperature Range | -55°C ~ 155°C |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitute parts for the RT0816R-103-M are categorized based on the following electrical and mechanical parameters that determine functional compatibility:
Primary Compatibility Criteria:
- Resistance Value: 10 kOhms (exact match required)
- Package / Case: 0603 (1608 Metric) (exact match required)
- Composition: Thin Film (maintained across all substitutes)
- Number of Terminations: 2 (exact match required)
Secondary Selection Parameters:
- Tolerance: Ranges from ±20% (original) to ±0.05% (precision upgrades)
- Power Rating: 0.063W (1/16W) to 0.167W (1/6W) — higher ratings provide design margin
- Temperature Coefficient: ±100ppm/°C (original) to ±10ppm/°C (precision grades)
- Operating Temperature Range: -55°C ~ 155°C (standard) or -55°C ~ 125°C (limited)
- Automotive Certification: AEC-Q200 available on select models
- Packaging Format: Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel®
Substitutes are organized into three categories: Upgrade options (improved tolerance and temperature stability), Direct equivalents (same specifications, different manufacturer), and Alternative packaging formats.
Parameter Comparison
| Part Number | Manufacturer | Resistance | Tolerance | Power Rating | Temp Coeff | Operating Temp | AEC-Q200 | Packaging |
|---|---|---|---|---|---|---|---|---|
| RT0816R-103-M | Susumu | 10 kOhms | ±20% | 0.063W (1/16W) | ±100ppm/°C | -55°C ~ 155°C | No | Tape & Reel (TR) |
| RG1608N-103-B-T5 | Susumu | 10 kOhms | ±0.1% | 0.1W (1/10W) | ±10ppm/°C | -55°C ~ 155°C | Yes | Tape & Reel (TR) |
| RG1608N-103-W-T5 | Susumu | 10 kOhms | ±0.05% | 0.1W (1/10W) | ±10ppm/°C | -55°C ~ 155°C | Yes | Tape & Reel (TR) |
| RG1608P-103-B-T5 | Susumu | 10 kOhms | ±0.1% | 0.1W (1/10W) | ±25ppm/°C | -55°C ~ 155°C | Yes | Cut Tape (CT) & Digi-Reel® |
| RG1608P-103-D-T5 | Susumu | 10 kOhms | ±0.5% | 0.1W (1/10W) | ±25ppm/°C | -55°C ~ 155°C | Yes | Tape & Reel (TR) |
| RR0816P-103-D | Susumu | 10 kOhms | ±0.5% | 0.063W (1/16W) | ±25ppm/°C | -55°C ~ 125°C | No | Cut Tape (CT) & Digi-Reel® |
| CPF0603B10KE | TE Connectivity Passive Product | 10 kOhms | ±0.1% | 0.063W (1/16W) | ±25ppm/°C | -55°C ~ 155°C | No | Tape & Reel (TR) |
| RP73PF1J10KBTDF | TE Connectivity Passive Product | 10 kOhms | ±0.1% | 0.167W (1/6W) | ±25ppm/°C | -55°C ~ 155°C | No | Tape & Reel (TR) |
| CPF0603B10KE1 | TE Connectivity Passive Product | 10 kOhms | ±0.1% | 0.063W (1/16W) | ±25ppm/°C | -55°C ~ 155°C | No | Tape & Reel (TR) |
| CPF0603F10KC1 | TE Connectivity Passive Product | 10 kOhms | ±1% | 0.063W (1/16W) | ±50ppm/°C | -55°C ~ 155°C | No | Tape & Reel (TR) |
| ERA-3AEB103V | Panasonic Electronic Components | 10 kOhms | ±0.1% | 0.1W (1/10W) | ±25ppm/°C | -55°C ~ 155°C | Yes | Cut Tape (CT) & Digi-Reel® |
Engineering Selection Recommendations
Susumu RG Series (Automotive-Grade Upgrades): The RG1608N-103-B-T5, RG1608N-103-W-T5, RG1608P-103-B-T5, and RG1608P-103-D-T5 represent precision upgrades from the standard RT0816R-103-M. All RG series parts carry AEC-Q200 automotive qualification and feature anti-sulfur construction. These parts maintain the same 0603 package footprint and operating temperature range (-55°C ~ 155°C) while offering tolerance specifications from ±0.05% to ±0.5% and improved temperature coefficients (±10ppm/°C to ±25ppm/°C). Power ratings increase to 0.1W (1/10W), providing additional thermal margin. Selection between RG models depends on tolerance and temperature stability requirements for the application.
Susumu RR Series (Precision Standard Power): The RR0816P-103-D maintains the original 0.063W (1/16W) power rating while improving tolerance to ±0.5% and temperature coefficient to ±25ppm/°C. This part operates within a reduced temperature range (-55°C ~ 125°C) compared to the original specification. The RR series is suitable for applications requiring improved precision without the automotive certification or increased power dissipation of the RG series.
TE Connectivity CPF Series (Precision Thin Film): The CPF0603B10KE, CPF0603B10KE1, and CPF0603F10KC1 are direct manufacturer alternatives from TE Connectivity's Neohm product line. CPF0603B10KE and CPF0603B10KE1 both provide ±0.1% tolerance with 0.063W power rating and ±25ppm/°C temperature coefficient. CPF0603F10KC1 offers ±1% tolerance with ±50ppm/°C temperature coefficient. All three maintain the -55°C ~ 155°C operating range and ROHS3 compliance. These parts are suitable for applications where TE Connectivity supply chain integration is preferred.
TE Connectivity RP73 Series (Higher Power Precision): The RP73PF1J10KBTDF provides ±0.1% tolerance with elevated 0.167W (1/6W) power rating, making it suitable for applications requiring higher power dissipation capability while maintaining precision specifications. Temperature coefficient is ±25ppm/°C with -55°C ~ 155°C operating range.
Panasonic ERA-3A Series (Automotive-Grade Alternative): The ERA-3AEB103V is a Panasonic alternative carrying AEC-Q200 automotive qualification. It provides ±0.1% tolerance, 0.1W (1/10W) power rating, and ±25ppm/°C temperature coefficient. Operating temperature range is -55°C ~ 155°C. This part is suitable for automotive applications requiring multi-source component availability.
Selection Criteria Summary:
- For standard tolerance applications: CPF0603F10KC1 (±1%) or RR0816P-103-D (±0.5%)
- For precision applications: RG1608N-103-W-T5 (±0.05%) or RG1608N-103-B-T5 (±0.1%)
- For automotive applications: RG1608N-103-B-T5, RG1608P-103-B-T5, RG1608P-103-D-T5, or ERA-3AEB103V (all AEC-Q200)
- For higher power dissipation: RP73PF1J10KBTDF (0.167W)
- For multi-source availability: CPF0603B10KE or CPF0603B10KE1 (TE Connectivity)
Frequently Asked Questions (FAQ)
Q: Can I directly replace RT0816R-103-M with any of the listed substitute parts?
A: Direct replacement is possible only if the application tolerates the changed electrical parameters. The RT0816R-103-M has ±20% tolerance and ±100ppm/°C temperature coefficient. All listed substitutes improve one or both of these parameters. If the circuit design requires the original ±20% tolerance specification, substitutes with tighter tolerances will not cause functional failure but represent over-specification. Verify that improved tolerance does not introduce unintended circuit behavior in precision-sensitive applications.
Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® packaging?
A: Both packaging formats contain the same 0603 component. Tape & Reel (TR) is continuous reel packaging suitable for high-volume automated assembly. Cut Tape (CT) & Digi-Reel® provides smaller quantity packaging with individual tape segments, suitable for lower-volume production or prototyping. Component electrical and mechanical specifications remain identical between packaging formats.
Q: Why do some substitutes have higher power ratings (0.1W or 0.167W) than the original 0.063W?
A: Higher power ratings provide thermal design margin and allow the component to dissipate more heat without exceeding maximum junction temperature. A 0.1W or 0.167W rated resistor can be used in applications designed for 0.063W without functional issues. The higher rating simply indicates greater thermal capability. This is a beneficial upgrade for applications operating near thermal limits.
Q: What does AEC-Q200 certification mean?
A: AEC-Q200 is an automotive industry qualification standard for passive components. Parts carrying this certification have undergone rigorous testing for reliability, temperature cycling, moisture resistance, and long-term stability. AEC-Q200 certification is required for automotive applications and recommended for high-reliability industrial applications. The original RT0816R-103-M does not carry AEC-Q200; substitutes with this certification (RG series and ERA-3AEB103V) are suitable for automotive designs.
Q: Can I use a substitute with ±0.05% tolerance in place of ±20% tolerance?
A: Yes. A component with tighter tolerance (±0.05%) will perform all functions of a component with looser tolerance (±20%). The actual resistance value will be closer to the nominal 10 kOhms specification. This substitution is always acceptable from a functional standpoint. However, verify that the circuit design does not depend on the original tolerance band for proper operation.
Q: What is the significance of temperature coefficient (ppm/°C)?
A: Temperature coefficient indicates how much the resistance value changes per degree Celsius change in operating temperature. The original RT0816R-103-M has ±100ppm/°C, meaning resistance can shift by up to 1% per 10°C temperature change. Substitutes with lower temperature coefficients (±10ppm/°C to ±25ppm/°C) provide more stable resistance across the operating temperature range. For precision analog circuits, lower temperature coefficients are beneficial.
Q: Are all listed substitutes ROHS3 compliant?
A: Yes. All substitute parts listed carry ROHS3 compliance status, matching the original RT0816R-103-M. All parts are also REACH Unaffected and classified as EAR99 for export control purposes.
Q: What is Moisture Sensitivity Level (MSL) 1?
A: MSL 1 indicates unlimited shelf life and moisture sensitivity. Components with MSL 1 do not require special moisture-controlled storage or baking procedures before soldering. All listed parts carry MSL 1 rating, providing identical handling requirements to the original component.
Q: Which substitute offers the best overall upgrade from RT0816R-103-M?
A: Selection depends on application requirements. For general precision improvement with automotive qualification: RG1608N-103-B-T5 (±0.1% tolerance, ±10ppm/°C, AEC-Q200). For maximum precision: RG1608N-103-W-T5 (±0.05% tolerance, ±10ppm/°C, AEC-Q200). For non-automotive applications requiring precision: CPF0603B10KE (±0.1% tolerance, ±25ppm/°C). For higher power capability: RP73PF1J10KBTDF (0.167W, ±0.1% tolerance).
Q: Can I mix different substitute parts in the same circuit board design?
A: Yes, provided each part location meets the specific electrical requirements of that circuit node. Mixing parts with different tolerances and temperature coefficients is acceptable if the circuit design accounts for the resulting tolerance stack-up and temperature drift characteristics. Document the specific part number used at each location for traceability and future maintenance.
Q: What is the physical size difference between RT0816R-103-M and the substitutes?
A: All listed substitutes use the 0603 (1608 Metric) package with identical footprint dimensions of 0.063" L x 0.031" W (1.60mm x 0.80mm). Height specifications vary slightly: RT0816R-103-M maximum height is 0.020" (0.50mm), while TE Connectivity parts (CPF and RP73 series) have maximum height of 0.022" (0.55mm). These height differences are negligible for standard PCB assembly and do not affect component placement or soldering.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts