RT0805FRE07976KL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07976KL is a 976 kOhms ±1% thin film chip resistor in 0805 (2012 Metric) package format, rated for 0.125W (1/8W) power dissipation. This component is manufactured by YAGEO and maintains Active product status with full RoHS3 compliance. Substitute parts are identified to address inventory availability, enhanced tolerance specifications, or automotive-grade requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

RT0805FRE07976KL

YAGEOIn Stock: 963RT0805FRE07976KL Datasheet

Current PartRFQ

RT0805BRD07976KL

YAGEOIn Stock: 20597RT0805BRD07976KL Datasheet

UpgradeRFQ

ERA-6AEB9763V

Panasonic Electronic ComponentsIn Stock: 19831ERA-6AEB9763V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE07976KL is determined by the following mandatory parameters:

• Resistance value: 976 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Power rating: 0.125W minimum (equal or higher acceptable)
• Composition: Thin Film (exact match required)
• Operating temperature range: -55°C ~ 155°C minimum (equal or wider acceptable)
• Moisture Sensitivity Level: MSL 1 or better (equal or lower MSL acceptable)
• RoHS compliance: ROHS3 Compliant (maintained)

Tolerance and temperature coefficient are secondary parameters that may vary between substitutes. Tighter tolerance specifications (lower values) represent functional upgrades and are acceptable substitutes. Temperature coefficient variations within the thin film resistor category do not affect substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

Both RT0805BRD07976KL and ERA-6AEB9763V are direct substitutes for RT0805FRE07976KL based on electrical and mechanical parameter equivalence.

RT0805BRD07976KL is a YAGEO thin film resistor offering improved tolerance specification (±0.1% versus ±1%) and reduced temperature coefficient (±25ppm/°C versus ±50ppm/°C) while maintaining identical package dimensions, power rating, and operating temperature range. This part is suitable for applications requiring enhanced precision without automotive-specific requirements.

ERA-6AEB9763V is a Panasonic thin film resistor with equivalent tolerance and temperature coefficient improvements to RT0805BRD07976KL. This part carries AEC-Q200 automotive qualification, making it appropriate for automotive applications requiring component-level reliability certification. All other electrical and mechanical parameters remain identical to the main part.

Selection between substitutes depends on application requirements: standard industrial applications may use RT0805BRD07976KL, while automotive applications requiring AEC-Q200 compliance must use ERA-6AEB9763V.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07976KL replace RT0805FRE07976KL in any application?

A: Yes. RT0805BRD07976KL maintains identical resistance value, package dimensions, power rating, and operating temperature range. The improved tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C) represent functional enhancements with no compatibility restrictions.

Q: What is the difference between RT0805BRD07976KL and ERA-6AEB9763V?

A: Both parts share identical electrical specifications (976 kOhms ±0.1%, 0.125W, ±25ppm/°C) and mechanical compatibility. The primary distinction is manufacturer and automotive qualification: ERA-6AEB9763V carries AEC-Q200 certification for automotive applications, while RT0805BRD07976KL is a standard industrial-grade component.

Q: Are all three parts mechanically interchangeable?

A: Yes. All three parts use the 0805 (2012 Metric) package with identical dimensions (0.079" L x 0.049" W, 2.00mm x 1.25mm) and maximum seated height (0.024" / 0.60mm). PCB footprints and assembly processes are identical.

Q: Which substitute should I use for automotive applications?

A: ERA-6AEB9763V is the appropriate substitute for automotive applications due to AEC-Q200 qualification. This certification ensures component reliability under automotive environmental and operational conditions.

Q: Does tolerance difference affect circuit performance?

A: Tolerance affects the precision of the resistance value. RT0805FRE07976KL allows ±1% variation (975.024 kOhms to 976.976 kOhms), while both substitutes allow ±0.1% variation (975.024 kOhms to 976.976 kOhms). Applications requiring tighter resistance tolerance specifications benefit from the substitute parts.

Q: Are all parts RoHS compliant?

A: Yes. All three parts maintain ROHS3 compliance and are suitable for applications with RoHS requirements.