RT0805FRE0795R3L Equivalent & Substitute Parts

Part Overview

The RT0805FRE0795R3L is a 95.3 Ohm ±1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This component is rated for 0.125W (1/8W) power dissipation with a temperature coefficient of ±50ppm/°C and operates across -55°C to 155°C. The part is ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating and maintains Active product status. Equivalent and substitute parts are identified based on matching resistance value, package format, and compatible electrical specifications within the thin film resistor category.

Substiute Parts

RT0805FRE0795R3L

YAGEOIn Stock: 1074RT0805FRE0795R3L Datasheet

Current PartRFQ

2-2176091-2

TE Connectivity Passive ProductIn Stock: 18882-2176091-2 Datasheet

DirectRFQ

ERA-6AEB95R3V

Panasonic Electronic ComponentsIn Stock: 4641ERA-6AEB95R3V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0805FRE0795R3L are qualified based on the following criteria:

Core Matching Parameters:

• Resistance value: 95.3 Ohms (exact match required)
• Package format: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Operating temperature range: -55°C ~ 155°C (minimum requirement)
• RoHS compliance: ROHS3 Compliant (minimum requirement)

Allowable Variations:

• Tolerance: May be equal to or tighter than ±1%
• Power rating: May be equal to or greater than 0.125W
• Temperature coefficient: May be equal to or lower in absolute value
• MSL rating: Must be 1 (Unlimited)

Two substitute parts meet these criteria and are listed below.

Parameter Comparison

Engineering Selection Recommendations

2-2176091-2 (Direct Substitute): This TE Connectivity part provides direct functional equivalence with improved tolerance (±0.1% vs ±1%) and higher power rating (0.25W vs 0.125W). The temperature coefficient is superior at ±25ppm/°C. All compliance requirements match the main part. This substitute is suitable for applications requiring the same footprint and performance envelope with enhanced specifications.

ERA-6AEB95R3V (Upgrade Substitute): This Panasonic part matches the power rating and tolerance specifications of the main part while offering improved temperature coefficient (±25ppm/°C). The component carries AEC-Q200 automotive qualification, providing additional reliability assurance for applications requiring automotive-grade components. All compliance and package requirements are met.

Frequently Asked Questions (FAQ)

Q: Can 2-2176091-2 be used as a direct replacement for RT0805FRE0795R3L?

A: Yes. Both parts share identical resistance value (95.3 Ohms), package format (0805), composition (thin film), and operating temperature range (-55°C ~ 155°C). The substitute offers tighter tolerance and higher power rating, making it functionally compatible for the same circuit applications.

Q: What is the difference between the two substitute parts?

A: 2-2176091-2 provides higher power dissipation capability (0.25W vs 0.125W). ERA-6AEB95R3V maintains the original power rating (0.125W) but includes AEC-Q200 automotive qualification. Both offer ±0.1% tolerance and ±25ppm/°C temperature coefficient compared to the main part's ±1% tolerance and ±50ppm/°C coefficient.

Q: Are all three parts interchangeable in the same PCB layout?

A: Yes. All three parts use the 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W). Physical placement and soldering procedures remain unchanged.

Q: Which substitute should be selected for automotive applications?

A: ERA-6AEB95R3V is qualified to AEC-Q200 automotive standards and is the appropriate choice for automotive-grade circuit designs.

Q: Do all parts meet RoHS compliance requirements?

A: Yes. RT0805FRE0795R3L, 2-2176091-2, and ERA-6AEB95R3V are all ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.