RT0805FRE0793K1L Equivalent & Substitute Parts

Part Overview

The RT0805FRE0793K1L is a 93.1 kOhms ±1% thin film chip resistor in 0805 (2012 Metric) package format, rated at 0.125W (1/8W) power dissipation. This component is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent resistance values, package dimensions, power ratings, and operating temperature ranges align with the original specification, enabling direct replacement in circuit applications.

Substiute Parts

RT0805FRE0793K1L

YAGEOIn Stock: 889RT0805FRE0793K1L Datasheet

Current PartRFQ

RT0805BRD0793K1L

YAGEOIn Stock: 9959RT0805BRD0793K1L Datasheet

UpgradeRFQ

ERA-6AEB9312V

Panasonic Electronic ComponentsIn Stock: 19548ERA-6AEB9312V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0805FRE0793K1L are qualified based on the following criteria:

• Identical resistance value: 93.1 kOhms
• Identical package format: 0805 (2012 Metric)
• Identical power rating: 0.125W (1/8W)
• Identical operating temperature range: -55°C ~ 155°C
• Identical composition: Thin Film
• Identical physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Identical number of terminations: 2
• Identical RoHS and REACH compliance status

Tolerance and temperature coefficient variations are permitted when the substitute part meets or exceeds the performance requirements of the original specification. Substitute parts may include additional certifications such as automotive qualification (AEC-Q200) without affecting direct substitutability.

Parameter Comparison

Engineering Selection Recommendations

Both RT0805BRD0793K1L and ERA-6AEB9312V are direct substitutes for RT0805FRE0793K1L. Selection between alternatives depends on application requirements:

RT0805BRD0793K1L offers improved tolerance specification (±0.1% versus ±1%) and reduced temperature coefficient (±25ppm/°C versus ±50ppm/°C) while maintaining identical package, power rating, and operating temperature range. This part is suitable for applications requiring tighter resistance accuracy.

ERA-6AEB9312V provides the same tolerance and temperature coefficient improvements as RT0805BRD0793K1L with the addition of AEC-Q200 automotive qualification. This part is appropriate for automotive and high-reliability applications where automotive-grade component certification is required.

All three parts maintain Active product status and full ROHS3 and REACH compliance, ensuring regulatory alignment across substitution options.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD0793K1L replace RT0805FRE0793K1L in any application?

A: Yes. Both parts share identical resistance value (93.1 kOhms), package format (0805), power rating (0.125W), operating temperature range (-55°C ~ 155°C), and physical dimensions. The substitute part offers superior tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), making it suitable for direct replacement.

Q: What is the difference between RT0805BRD0793K1L and ERA-6AEB9312V?

A: Both parts are electrically and mechanically equivalent with identical resistance, tolerance, power rating, package, and operating temperature specifications. ERA-6AEB9312V includes AEC-Q200 automotive qualification, making it the appropriate choice for automotive applications. RT0805BRD0793K1L is the standard industrial-grade equivalent.

Q: Are all three parts compatible with the same PCB layout?

A: Yes. All three parts conform to the 0805 (2012 Metric) package standard with identical physical dimensions (0.079" L x 0.049" W, 2.00mm x 1.25mm) and maximum seated height (0.024" / 0.60mm). No PCB layout modifications are required when substituting between these parts.

Q: Does tolerance improvement affect circuit performance?

A: Tolerance improvement from ±1% to ±0.1% reduces resistance variation across the component population. Applications sensitive to resistance accuracy will benefit from the tighter tolerance specification of RT0805BRD0793K1L or ERA-6AEB9312V. Applications with loose tolerance requirements will function identically with all three parts.

Q: Are moisture sensitivity and compliance ratings identical across all three parts?

A: Yes. All three parts share identical Moisture Sensitivity Level (MSL 1 - Unlimited), ROHS3 compliance, and REACH Unaffected status, ensuring equivalent environmental and regulatory performance.