806 Ohm 0805 SMD Chip Resistor RT0805FRE07806RL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07806RL is an 806 Ohm ±1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This component is actively produced and widely used in general-purpose electronic applications requiring precision resistive elements. Substitute parts are identified based on matching resistance value, package form factor, and compatible electrical specifications within the 0805 SMD category.

Substiute Parts

RT0805FRE07806RL

YAGEOIn Stock: 1146RT0805FRE07806RL Datasheet

Current PartRFQ

RT0805BRD07806RL

YAGEOIn Stock: 2435RT0805BRD07806RL Datasheet

UpgradeRFQ

2176092-9

TE Connectivity Passive ProductIn Stock: 14792176092-9 Datasheet

DirectRFQ

ERA-6AEB8060V

Panasonic Electronic ComponentsIn Stock: 6590ERA-6AEB8060V Datasheet

UpgradeRFQ

RG2012P-8060-B-T5

SusumuIn Stock: 5683RG2012P-8060-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0805FRE07806RL are qualified based on the following criteria:

• Resistance Value: All substitutes maintain 806 Ohms nominal resistance
• Package Compatibility: All substitutes use 0805 (2012 Metric) package form factor
• Composition: All substitutes are thin film construction
• Operating Temperature Range: All substitutes support -55°C ~ 155°C operation
• RoHS Compliance: All substitutes maintain ROHS3 compliance
• Moisture Sensitivity: All substitutes rated MSL 1 (Unlimited)

Substitutes are grouped by tolerance specification and power rating capability. The main part specifies ±1% tolerance at 0.125W. Upgrade substitutes offer improved tolerance (±0.1%) and/or enhanced power handling (0.25W) while maintaining package compatibility and environmental specifications.

Parameter Comparison

Engineering Selection Recommendations

RT0805BRD07806RL (YAGEO): Direct upgrade from the main part within the same manufacturer series. Offers improved tolerance specification (±0.1% vs ±1%) and reduced temperature coefficient (±25ppm/°C vs ±50ppm/°C) while maintaining identical power rating and package. Maintains ROHS3 compliance and MSL 1 rating.

2176092-9 (TE Connectivity Passive Product): Provides increased power handling capability (0.25W vs 0.125W) with improved tolerance (±0.1%) and temperature coefficient (±25ppm/°C). Maintains 0805 package compatibility and ROHS3 compliance. Height specification increases to 0.026" maximum.

ERA-6AEB8060V (Panasonic Electronic Components): Automotive-grade substitute with AEC-Q200 qualification. Offers improved tolerance (±0.1%) and temperature coefficient (±25ppm/°C) specifications. Maintains 0.125W power rating and 0805 package. Suitable for applications requiring automotive component qualification.

RG2012P-8060-B-T5 (Susumu): Automotive-grade substitute with AEC-Q200 qualification and anti-sulfur feature. Provides improved tolerance (±0.1%) and temperature coefficient (±25ppm/°C). Maintains 0.125W power rating and 0805 package. Height specification reduces to 0.020" maximum, offering compact mounting profile.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07806RL replace RT0805FRE07806RL in all applications?

A: Yes. RT0805BRD07806RL maintains identical resistance value, power rating, package form factor, and operating temperature range. The improved tolerance and temperature coefficient specifications make it a direct upgrade with no functional limitations.

Q: When should 2176092-9 be selected instead of the main part?

A: Select 2176092-9 when circuit design requires higher power dissipation capability (0.25W vs 0.125W) or when improved tolerance and temperature stability are critical. The increased height (0.026" vs 0.024") must be verified against PCB layout constraints.

Q: What is the difference between ERA-6AEB8060V and RG2012P-8060-B-T5?

A: Both are automotive-grade AEC-Q200 qualified substitutes with identical electrical specifications. RG2012P-8060-B-T5 includes anti-sulfur feature and offers reduced maximum height (0.020" vs 0.024"), providing enhanced environmental protection and compact mounting profile.

Q: Are automotive-grade substitutes (ERA-6AEB8060V, RG2012P-8060-B-T5) suitable for non-automotive applications?

A: Yes. Automotive-grade components meet or exceed general-purpose specifications and are fully compatible with non-automotive applications. Their enhanced qualification and environmental protection provide additional reliability margin.

Q: Do all substitute parts maintain the same moisture sensitivity level?

A: Yes. All substitute parts maintain MSL 1 (Unlimited) rating, identical to the main part. No special moisture handling procedures are required for any of these components.

Q: Can substitute parts be mixed within the same assembly?

A: Yes. All substitute parts maintain identical resistance value, package form factor, and operating temperature range. Mixed usage is permissible provided circuit design accommodates the tolerance and temperature coefficient variations of individual parts.