RT0805FRE07715KL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07715KL is a 715 kOhms ±1% thin film chip resistor manufactured by YAGEO in the 0805 (2012 Metric) package format. This surface mount device is rated for 0.125W (1/8W) power dissipation and operates across the temperature range of -55°C to 155°C. The component is ROHS3 compliant and carries an MSL rating of 1 (Unlimited), making it suitable for standard industrial and commercial applications. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and compliance requirements can be maintained while potentially offering improved specifications or enhanced reliability features.

Substiute Parts

RT0805FRE07715KL

YAGEOIn Stock: 912RT0805FRE07715KL Datasheet

Current PartRFQ

ERA-6AEB7153V

Panasonic Electronic ComponentsIn Stock: 14702ERA-6AEB7153V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE07715KL is determined by the following critical parameters:

• Resistance Value: Must be 715 kOhms
• Package Format: Must be 0805 (2012 Metric)
• Power Rating: Must be 0.125W (1/8W) or higher
• Composition: Must be Thin Film
• Operating Temperature Range: Must encompass -55°C to 155°C
• Compliance: Must maintain ROHS3 compliance and MSL 1 rating

The ERA-6AEB7153V qualifies as a direct substitute because it matches all critical parameters while offering enhanced tolerance (±0.1% versus ±1%) and improved temperature coefficient performance (±25ppm/°C versus ±50ppm/°C). Both components share identical package dimensions, termination count, and environmental compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both the RT0805FRE07715KL and ERA-6AEB7153V are Active status components with full ROHS3 compliance and unlimited moisture sensitivity ratings. The ERA-6AEB7153V carries AEC-Q200 automotive qualification, which provides additional reliability assurance for applications requiring enhanced quality standards. Selection between these components should be based on application-specific tolerance requirements and supply chain availability. The ERA-6AEB7153V's superior tolerance specification (±0.1%) and lower temperature coefficient (±25ppm/°C) make it suitable for precision circuit applications, while the RT0805FRE07715KL remains appropriate for general-purpose applications where ±1% tolerance is acceptable.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB7153V be used as a direct replacement for RT0805FRE07715KL?

A: Yes. Both components share identical resistance values, package formats, power ratings, and operating temperature ranges. The ERA-6AEB7153V offers improved tolerance and temperature coefficient specifications while maintaining full mechanical and electrical compatibility.

Q: Are there any package or footprint differences between these components?

A: No. Both components use the 0805 (2012 Metric) package with identical dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm) and maximum seated height of 0.024" (0.60mm). PCB footprints are interchangeable.

Q: What is the significance of the AEC-Q200 rating on the ERA-6AEB7153V?

A: AEC-Q200 is an automotive qualification standard that certifies component reliability for automotive applications. This certification is not present on the RT0805FRE07715KL but does not prevent its use in non-automotive applications.

Q: Do both components meet the same compliance requirements?

A: Yes. Both components are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) ratings. They share identical ECCN (EAR99) and HTSUS (8533.21.0030) classifications.

Q: What tolerance specification should I select for my application?

A: Selection depends on circuit requirements. The RT0805FRE07715KL with ±1% tolerance is suitable for general applications. The ERA-6AEB7153V with ±0.1% tolerance is appropriate for precision circuits requiring tighter resistance value control.