RT0805FRE076R8L Equivalent & Substitute Parts

Part Overview

The RT0805FRE076R8L is a 6.8 Ohms ±1% thin film chip resistor in 0805 (2012 Metric) package format, rated at 0.125W (1/8W) power dissipation. Manufactured by YAGEO under the RT series, this component is classified as Active product status with full RoHS3 compliance. Alternative equivalent parts may be required due to inventory availability, tolerance specifications, or specific application requirements where tighter tolerance performance is necessary.

Substiute Parts

RT0805FRE076R8L

YAGEOIn Stock: 919RT0805FRE076R8L Datasheet

Current PartRFQ

RT0805DRE076R8L

YAGEOIn Stock: 7129RT0805DRE076R8L Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RT0805FRE076R8L is based on the following critical parameters that must remain constant or improve:

• Resistance Value: Must be 6.8 Ohms (no deviation)
• Package Format: Must be 0805 (2012 Metric) for PCB footprint compatibility
• Power Rating: Must be ≥0.125W (1/8W)
• Composition: Thin film construction for performance consistency
• Temperature Coefficient: ±50ppm/°C or better
• Operating Temperature Range: Must cover -55°C ~ 155°C minimum
• Compliance: RoHS3 and REACH status must be maintained

The RT0805DRE076R8L qualifies as a direct substitute because it maintains all critical parameters while offering improved tolerance specification (±0.5% versus ±1%), which represents an upgrade path for applications requiring tighter resistance accuracy.

Parameter Comparison

Engineering Selection Recommendations

Both the RT0805FRE076R8L and RT0805DRE076R8L are Active product status components manufactured by YAGEO with identical RoHS3 and REACH compliance certifications. Selection between these parts should be based on tolerance requirements:

• RT0805FRE076R8L: Select for applications where ±1% tolerance meets circuit specifications and cost optimization is prioritized.
• RT0805DRE076R8L: Select for applications requiring tighter tolerance control (±0.5%) or where precision analog circuits demand improved resistance accuracy.

Both components are suitable for direct PCB substitution without layout modifications due to identical 0805 package dimensions and electrical ratings.

Frequently Asked Questions (FAQ)

Q: Can RT0805DRE076R8L replace RT0805FRE076R8L in existing designs?

A: Yes. The RT0805DRE076R8L is a direct substitute with identical package, power rating, and operating temperature range. The improved ±0.5% tolerance is backward compatible with designs specified for ±1% tolerance.

Q: Are there any PCB layout considerations when substituting these parts?

A: No. Both parts use identical 0805 (2012 Metric) package dimensions (0.079" L x 0.049" W, 2.00mm x 1.25mm) with 0.024" (0.60mm) maximum seated height. No footprint or layout modifications are required.

Q: What is the difference between these two part numbers?

A: The primary difference is tolerance specification. RT0805FRE076R8L offers ±1% tolerance, while RT0805DRE076R8L provides ±0.5% tolerance. All other electrical and mechanical parameters remain identical.

Q: Are both parts RoHS3 compliant?

A: Yes. Both RT0805FRE076R8L and RT0805DRE076R8L are ROHS3 Compliant with Moisture Sensitivity Level 1 (Unlimited), suitable for standard manufacturing and storage conditions.

Q: Can these parts be used interchangeably in high-temperature applications?

A: Yes. Both components maintain identical operating temperature range of -55°C ~ 155°C and ±50ppm/°C temperature coefficient, ensuring consistent performance across the full temperature spectrum.