Equivalent & Substitute Parts for RT0805FRE076K34L

Part Overview

The RT0805FRE076K34L is a 6.34 kOhms ±1% thin film chip resistor in 0805 (2012 Metric) package rated at 0.125W (1/8W). This YAGEO component is actively produced and ROHS3 compliant. Substitute parts are identified based on matching resistance value, package format, and electrical performance within acceptable tolerance and power rating parameters.

Substiute Parts

RT0805FRE076K34L

YAGEOIn Stock: 948RT0805FRE076K34L Datasheet

Current PartRFQ

RT0805BRD076K34L

YAGEOIn Stock: 3319RT0805BRD076K34L Datasheet

UpgradeRFQ

8-2176092-7

TE Connectivity Passive ProductIn Stock: 27558-2176092-7 Datasheet

DirectRFQ

ERA-6AEB6341V

Panasonic Electronic ComponentsIn Stock: 13312ERA-6AEB6341V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE076K34L is determined by the following criteria:

Primary Matching Parameters:

• Resistance value: 6.34 kOhms (exact match required)
• Package format: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Operating temperature range: -55°C ~ 155°C (minimum requirement)

Secondary Compatibility Parameters:

• Tolerance: ±1% or better (tighter tolerance acceptable)
• Power rating: 0.125W minimum (higher ratings acceptable)
• Temperature coefficient: ±50ppm/°C or better (lower values acceptable)
• RoHS compliance: ROHS3 Compliant (required)

Substitute parts meeting all primary parameters and maintaining or exceeding secondary parameter specifications are electrically and mechanically compatible with the original part.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status and ROHS3 compliance. Selection between substitutes depends on application-specific requirements:

RT0805BRD076K34L (YAGEO): Tighter tolerance (±0.1%) and lower temperature coefficient (±25ppm/°C) compared to the original part. Identical power rating and package. Suitable for applications requiring improved tolerance performance.

8-2176092-7 (TE Connectivity): Higher power rating (0.25W vs. 0.125W) with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Slightly increased height (0.026" vs. 0.024"). Suitable for applications with higher power dissipation requirements or thermal margin needs.

ERA-6AEB6341V (Panasonic): ±0.1% tolerance with ±25ppm/°C temperature coefficient and AEC-Q200 automotive qualification. Identical power rating and package dimensions to the original part. Suitable for automotive applications or environments requiring automotive-grade component reliability.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD076K34L replace RT0805FRE076K34L in any application?

A: Yes. RT0805BRD076K34L is electrically and mechanically compatible. It provides tighter tolerance (±0.1% vs. ±1%) and lower temperature coefficient (±25ppm/°C vs. ±50ppm/°C), making it suitable for all applications where the original part is specified.

Q: What is the difference between the 0.125W and 0.25W power ratings?

A: The 8-2176092-7 is rated for 0.25W continuous power dissipation compared to 0.125W for other listed parts. This higher rating provides additional thermal margin in power-dissipative applications. The 0.25W part can be used in place of 0.125W-rated parts without derating concerns.

Q: Is ERA-6AEB6341V suitable for non-automotive applications?

A: Yes. ERA-6AEB6341V meets all electrical and mechanical requirements for the original part. AEC-Q200 qualification indicates enhanced reliability testing and is not restrictive for non-automotive use.

Q: Are all substitute parts available in the same packaging format?

A: Yes. All substitute parts use 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). Height variation is minimal (0.024" to 0.026" seated maximum) and does not affect PCB assembly compatibility.

Q: What tolerance should I specify for critical circuit applications?

A: For applications sensitive to resistance value variation, specify ±0.1% tolerance parts: RT0805BRD076K34L, 8-2176092-7, or ERA-6AEB6341V. These provide four times tighter tolerance than the original ±1% specification.