RT0805FRE0760R4L Equivalent & Substitute Parts

Part Overview

The RT0805FRE0760R4L is a 60.4 Ohm ±1% thin film chip resistor in 0805 (2012 Metric) package format, rated at 0.125W (1/8W) power dissipation. Manufactured by YAGEO under the RT series, this component is actively produced and ROHS3 compliant. Finding equivalent and substitute parts becomes necessary when addressing supply chain constraints, design upgrades requiring tighter tolerances, or application-specific requirements such as automotive qualification or enhanced power handling.

Substiute Parts

RT0805FRE0760R4L

YAGEOIn Stock: 5860RT0805FRE0760R4L Datasheet

Current PartRFQ

RT0805BRD0760R4L

YAGEOIn Stock: 8102RT0805BRD0760R4L Datasheet

UpgradeRFQ

2176091-3

TE Connectivity Passive ProductIn Stock: 603002176091-3 Datasheet

DirectRFQ

ERA-6AEB60R4V

Panasonic Electronic ComponentsIn Stock: 1171ERA-6AEB60R4V Datasheet

UpgradeRFQ

RG2012P-60R4-D-T5

SusumuIn Stock: 992RG2012P-60R4-D-T5 Datasheet

UpgradeRFQ

RNCF0805BKC60R4

Stackpole Electronics IncIn Stock: 1226RNCF0805BKC60R4 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE0760R4L is determined by the following criteria:

Mandatory Parameters (Must Match):

• Resistance value: 60.4 Ohms
• Package / Case: 0805 (2012 Metric)
• Composition: Thin Film
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variations:

• Tolerance: May be equal or tighter (±1%, ±0.1%, ±0.5%)
• Power Rating: May be equal or higher (0.125W, 0.25W)
• Temperature Coefficient: May be equal or tighter (±50ppm/°C, ±25ppm/°C)
• Manufacturer: Different manufacturers permitted
• Packaging Format: Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel® acceptable
• Certifications: Additional certifications (AEC-Q200) permitted

Parameter Comparison

Engineering Selection Recommendations

Standard Industrial Applications: RT0805BRD0760R4L (YAGEO) provides a direct upgrade path with tighter tolerance (±0.1% vs ±1%) and improved temperature coefficient (±25ppm/°C vs ±50ppm/°C) while maintaining identical package and power rating. Product status is active with substantial inventory availability.

Higher Power Dissipation Requirements: 2176091-3 (TE Connectivity Passive Product) or RNCF0805BKC60R4 (Stackpole Electronics Inc) accommodate 0.25W power rating while maintaining 60.4 Ohm resistance and 0805 package. Both are ROHS3 compliant and actively produced.

Automotive Applications: ERA-6AEB60R4V (Panasonic Electronic Components) and RG2012P-60R4-D-T5 (Susumu) carry AEC-Q200 automotive qualification. ERA-6AEB60R4V matches the original 0.125W rating with ±0.1% tolerance. RG2012P-60R4-D-T5 adds anti-sulfur protection with ±0.5% tolerance and AEC-Q200 rating.

All substitute parts maintain ROHS3 compliance, -55°C to 155°C operating range, and MSL 1 (Unlimited) moisture sensitivity rating.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD0760R4L replace RT0805FRE0760R4L in any circuit? A: Yes. RT0805BRD0760R4L is a direct substitute with improved specifications (tighter tolerance and lower temperature coefficient). The 0805 package, 60.4 Ohm resistance, and 0.125W power rating are identical. Tighter tolerance provides better circuit performance without compatibility issues.

Q: What is the difference between 0.125W and 0.25W power ratings? A: Power rating indicates maximum continuous power dissipation. A 0.25W component can safely dissipate twice the power of a 0.125W component. Substituting a 0.25W part for a 0.125W part is acceptable; the reverse substitution is not recommended if the circuit requires 0.25W dissipation capability.

Q: Are automotive-qualified parts (AEC-Q200) compatible with non-automotive applications? A: Yes. AEC-Q200 qualification represents additional testing and reliability assurance. Automotive-qualified parts meet or exceed standard industrial specifications and function in non-automotive circuits. This substitution introduces no compatibility risk.

Q: Does tolerance affect circuit functionality? A: Tolerance determines the acceptable resistance range. ±1% tolerance allows ±0.604 Ohm variation from 60.4 Ohms. ±0.1% tolerance allows ±0.0604 Ohm variation. Tighter tolerance (±0.1%) provides more precise resistance values, beneficial for precision circuits. Substituting tighter tolerance for looser tolerance improves circuit accuracy.

Q: Can I use ERA-6AEB60R4V (Cut Tape & Digi-Reel) in place of RT0805FRE0760R4L (Tape & Reel)? A: Yes. Both packaging formats contain identical components in 0805 package. Packaging format affects handling and assembly logistics, not electrical or mechanical compatibility. Component specifications remain identical regardless of packaging format.

Q: What does temperature coefficient ±50ppm/°C mean? A: Temperature coefficient indicates resistance change per degree Celsius. ±50ppm/°C means resistance changes by up to 50 parts per million per °C. For a 60.4 Ohm resistor, this represents approximately 0.003 Ohm change per °C. Lower temperature coefficient (±25ppm/°C) indicates better stability across temperature variations.