Equivalent & Substitute Parts for RT0805FRE0760K4L

Part Overview

The RT0805FRE0760K4L is a 60.4 kOhms ±1% thin film chip resistor in 0805 (2012 Metric) package rated at 0.125W (1/8W) power dissipation. This YAGEO component operates across -55°C to 155°C and is ROHS3 compliant with MSL 1 rating. The part is currently active in production with 5930 units in stock. Substitute parts are identified to address applications requiring tighter tolerance specifications, enhanced automotive qualification, or alternative manufacturer sourcing while maintaining core electrical and mechanical compatibility.

Substiute Parts

RT0805FRE0760K4L

YAGEOIn Stock: 6011RT0805FRE0760K4L Datasheet

Current PartRFQ

RT0805BRD0760K4L

YAGEOIn Stock: 11170RT0805BRD0760K4L Datasheet

UpgradeRFQ

7-2176093-4

TE Connectivity Passive ProductIn Stock: 18367-2176093-4 Datasheet

DirectRFQ

ERA-6AEB6042V

Panasonic Electronic ComponentsIn Stock: 13577ERA-6AEB6042V Datasheet

UpgradeRFQ

RG2012P-6042-B-T5

SusumuIn Stock: 11809RG2012P-6042-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following mandatory parameters:

• Resistance Value: Must be 60.4 kOhms (exact match required)
• Package Type: Must be 0805 (2012 Metric) for PCB footprint compatibility
• Composition: Must be thin film for electrical performance consistency
• Operating Temperature Range: Must support -55°C to 155°C minimum
• RoHS Compliance: Must maintain ROHS3 compliance status
• MSL Rating: Must be MSL 1 or equivalent for moisture sensitivity

Tolerance, temperature coefficient, and power rating variations are permitted within the substitute group when the above core parameters are maintained. Automotive AEC-Q200 qualification is an optional enhancement available in certain substitutes.

Parameter Comparison

Engineering Selection Recommendations

RT0805BRD0760K4L (YAGEO): Direct upgrade from the main part with improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C). Maintains identical power rating and package dimensions. Suitable for applications requiring enhanced precision without automotive qualification requirements. 11091 units in stock.

7-2176093-4 (TE Connectivity): Provides higher power dissipation capability (0.25W vs 0.125W) with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Height increases to 0.65mm maximum. Appropriate for designs with elevated thermal requirements or where TE Connectivity sourcing is preferred. 1819 units in stock.

ERA-6AEB6042V (Panasonic): Automotive AEC-Q200 qualified thin film resistor with ±0.1% tolerance and ±25ppm/°C temperature coefficient. Maintains 0.125W power rating and 0.60mm height. Suitable for automotive and high-reliability applications. 13510 units in stock.

RG2012P-6042-B-T5 (Susumu): Automotive AEC-Q200 qualified with anti-sulfur feature, ±0.1% tolerance, and ±25ppm/°C temperature coefficient. Lowest profile at 0.50mm height. Designed for automotive environments with corrosive exposure risk. 11764 units in stock.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD0760K4L replace RT0805FRE0760K4L in any application?

A: Yes, within the constraints of tolerance and temperature coefficient requirements. The RT0805BRD0760K4L offers superior tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C), making it suitable for precision-critical circuits. Verify that your design does not depend on the higher tolerance band of the original part.

Q: What is the primary difference between the TE Connectivity 7-2176093-4 and other substitutes?

A: The 7-2176093-4 provides double the power dissipation (0.25W vs 0.125W) and increases in height to 0.65mm. Select this part only if your thermal design requires higher power handling capability and PCB layout accommodates the increased height.

Q: Are the Panasonic ERA-6AEB6042V and Susumu RG2012P-6042-B-T5 interchangeable?

A: Both are AEC-Q200 qualified with identical electrical specifications (60.4 kOhms, ±0.1%, ±25ppm/°C, 0.125W). The primary difference is the Susumu part includes anti-sulfur protection and has a lower profile (0.50mm vs 0.60mm). Select based on environmental exposure requirements and available PCB clearance.

Q: Do all substitute parts maintain the same MSL rating?

A: Yes, all listed substitutes maintain MSL 1 (Unlimited) moisture sensitivity level, ensuring equivalent handling and storage requirements to the original RT0805FRE0760K4L.

Q: Can I use a substitute part with tighter tolerance in a design specified for ±1%?

A: Yes, parts with tighter tolerance (±0.1%) are backward compatible with ±1% specifications. The tighter tolerance provides additional margin and improved circuit performance. No design modification is required.

Q: What is the significance of AEC-Q200 qualification?

A: AEC-Q200 qualification indicates the component meets automotive industry reliability and performance standards. Select AEC-Q200 qualified parts (ERA-6AEB6042V or RG2012P-6042-B-T5) for automotive applications or high-reliability environments. Non-automotive applications do not require this qualification.