RT0805FRE075K76L Equivalent & Substitute Parts

Part Overview

The RT0805FRE075K76L is a 5.76 kOhms ±1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This component is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part is currently active in production and ROHS3 compliant. Substitute parts are identified when equivalent resistance values, package dimensions, and thermal operating ranges are maintained while offering improved tolerance specifications or enhanced reliability features.

Substiute Parts

RT0805FRE075K76L

YAGEOIn Stock: 1040RT0805FRE075K76L Datasheet

Current PartRFQ

8-2176092-3

TE Connectivity Passive ProductIn Stock: 33858-2176092-3 Datasheet

DirectRFQ

ERA-6AEB5761V

Panasonic Electronic ComponentsIn Stock: 15362ERA-6AEB5761V Datasheet

UpgradeRFQ

RG2012P-5761-B-T5

SusumuIn Stock: 1699RG2012P-5761-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE075K76L is determined by the following criteria:

• Resistance Value: Must be 5.76 kOhms
• Package / Case: Must be 0805 (2012 Metric)
• Composition: Must be Thin Film
• Operating Temperature Range: Must support -55°C to 155°C minimum
• Termination Count: Must be 2 terminations
• Physical Dimensions: Must maintain 0.079" L x 0.049" W (2.00mm x 1.25mm)

Substitute parts may exceed the original tolerance specification (±1%) and power rating (0.125W) without compromising compatibility. Enhanced features such as automotive qualification (AEC-Q200) or anti-sulfur properties do not prevent substitution. All identified substitutes maintain the same package footprint and electrical operating parameters.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain active product status and ROHS3 compliance. Selection between the RT0805FRE075K76L and its substitutes depends on application-specific requirements:

8-2176092-3 (TE Connectivity RP73P): Offers improved tolerance (±0.1%) and increased power rating (0.25W). Seated height is 0.026" (0.65mm), which is 0.002" higher than the original part. This substitute is suitable for applications requiring tighter tolerance specifications where additional thermal headroom is beneficial.

ERA-6AEB5761V (Panasonic ERA-6A): Provides improved tolerance (±0.1%) and automotive AEC-Q200 qualification. Maintains identical seated height (0.024") and power rating (0.125W) as the original part. This substitute is appropriate for automotive applications or designs requiring AEC-Q200 certified components.

RG2012P-5761-B-T5 (Susumu RG): Delivers improved tolerance (±0.1%), automotive AEC-Q200 qualification, and anti-sulfur properties. Seated height is 0.020" (0.50mm), the lowest among all options. This substitute is optimal for space-constrained designs or harsh environmental conditions requiring anti-sulfur protection.

Frequently Asked Questions (FAQ)

Q: Can I substitute the RT0805FRE075K76L with any of these parts on my PCB?

A: Yes, all listed substitutes are compatible. They maintain the same 0805 (2012 Metric) package footprint and 2.00mm x 1.25mm physical dimensions. Verify that your PCB layout accommodates the maximum seated height of each substitute (ranging from 0.020" to 0.026").

Q: What is the difference between ±1% and ±0.1% tolerance?

A: Tolerance specifies the allowable deviation from the nominal resistance value. The RT0805FRE075K76L has ±1% tolerance, meaning the actual resistance can vary by up to 1% from 5.76 kOhms. All substitute parts offer ±0.1% tolerance, providing tighter resistance accuracy. This is beneficial in precision analog circuits but not required for general-purpose applications.

Q: Why does the TE Connectivity part have a higher power rating (0.25W vs 0.125W)?

A: The 8-2176092-3 is rated for higher power dissipation. This does not affect compatibility; it simply means the part can safely handle more thermal stress. Use this substitute if your circuit requires additional thermal margin or if the original part experiences thermal stress.

Q: What does AEC-Q200 qualification mean?

A: AEC-Q200 is an automotive industry standard for passive components. Parts meeting this specification have undergone rigorous testing for reliability in automotive environments. The ERA-6AEB5761V and RG2012P-5761-B-T5 are AEC-Q200 qualified, making them suitable for automotive applications or designs requiring automotive-grade reliability.

Q: What is the anti-sulfur feature on the Susumu part?

A: Anti-sulfur protection prevents degradation caused by hydrogen sulfide exposure in harsh industrial or marine environments. The RG2012P-5761-B-T5 includes this feature, making it suitable for applications in corrosive atmospheres.

Q: Will the different seated heights affect my PCB assembly?

A: Seated height differences (0.020" to 0.026") are minimal and typically do not affect PCB assembly processes. However, verify compatibility with your specific assembly equipment and conformal coating requirements if applicable.

Q: Are all substitutes available in Tape & Reel (TR) packaging?

A: Yes, all listed substitutes are supplied in Tape & Reel packaging, consistent with the original RT0805FRE075K76L.