RT0805FRE0759RL Equivalent & Substitute Parts

Part Overview

The RT0805FRE0759RL is a 59 Ohm ±1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This surface mount resistor is rated for 0.125W (1/8W) power dissipation and operates across -55°C to 155°C. The component is ROHS3 compliant with MSL 1 rating, indicating unlimited moisture sensitivity protection. As an active product with 851 units in stock, equivalent and substitute parts are available from alternative manufacturers offering improved tolerance specifications or enhanced automotive qualification.

Substiute Parts

RT0805FRE0759RL

YAGEOIn Stock: 892RT0805FRE0759RL Datasheet

Current PartRFQ

2176091-2

TE Connectivity Passive ProductIn Stock: 19702176091-2 Datasheet

DirectRFQ

ERA-6AEB59R0V

Panasonic Electronic ComponentsIn Stock: 8754ERA-6AEB59R0V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE0759RL is determined by the following mandatory parameters:

• Resistance value: 59 Ohms (exact match required)
• Package type: 0805 (2012 Metric) form factor
• Composition: Thin film construction
• Operating temperature range: -55°C to 155°C minimum
• RoHS compliance: ROHS3 Compliant
• MSL rating: 1 or better

Tolerance, power rating, and temperature coefficient may vary within acceptable substitution ranges. The substitute parts listed below meet all mandatory parameters while offering improved tolerance specifications (±0.1% versus ±1%) and/or automotive-grade qualification.

Parameter Comparison

Engineering Selection Recommendations

2176091-2 (TE Connectivity Passive Product): This direct substitute offers improved tolerance specification (±0.1% versus ±1%) and increased power rating (0.25W versus 0.125W). The higher power rating provides additional thermal margin in applications with variable load conditions. Temperature coefficient is reduced to ±25ppm/°C. Maximum seated height is 0.026" (0.65mm), which is 0.002" higher than the original part. ROHS3 compliance and MSL 1 rating are maintained. This part is suitable for applications requiring tighter resistance tolerance without automotive qualification requirements.

ERA-6AEB59R0V (Panasonic Electronic Components): This upgrade substitute combines improved tolerance (±0.1%), reduced temperature coefficient (±25ppm/°C), and automotive AEC-Q200 qualification. Physical dimensions and height match the original part exactly (0.024" seated height). This part is specified for automotive applications requiring enhanced reliability and qualification documentation. ROHS3 compliance and MSL 1 rating are maintained. Selection of this part is appropriate for automotive-grade designs or applications requiring AEC-Q200 certification.

Frequently Asked Questions (FAQ)

Q: Can the 2176091-2 be used in place of the RT0805FRE0759RL?

A: Yes. Both parts share identical resistance value (59 Ohms), package type (0805), composition (thin film), and operating temperature range (-55°C to 155°C). The 2176091-2 offers superior tolerance (±0.1% versus ±1%) and higher power rating (0.25W versus 0.125W). The maximum seated height difference is 0.002" (0.65mm versus 0.60mm), which is within typical PCB assembly tolerances for 0805 components.

Q: Can the ERA-6AEB59R0V be used in place of the RT0805FRE0759RL?

A: Yes. Both parts are identical in resistance value (59 Ohms), package type (0805), power rating (0.125W), and physical dimensions. The ERA-6AEB59R0V provides improved tolerance (±0.1% versus ±1%) and reduced temperature coefficient (±25ppm/°C versus ±50ppm/°C). The addition of AEC-Q200 automotive qualification makes this part suitable for automotive applications.

Q: What is the primary difference between the two substitute parts?

A: The 2176091-2 offers higher power dissipation capability (0.25W versus 0.125W) and is suited for general industrial applications. The ERA-6AEB59R0V maintains the original power rating (0.125W) but includes automotive AEC-Q200 qualification, making it appropriate for automotive-grade designs.

Q: Are there any height clearance concerns with the 2176091-2?

A: The 2176091-2 has a maximum seated height of 0.026" (0.65mm) compared to 0.024" (0.60mm) for the original part. This 0.002" difference is negligible for standard PCB assembly and should not create clearance issues in typical 0805 component layouts.

Q: Do all three parts have the same moisture sensitivity rating?

A: Yes. The RT0805FRE0759RL, 2176091-2, and ERA-6AEB59R0V all carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.

Q: Which substitute part should be selected for cost optimization?

A: Selection should be based on application requirements rather than cost alone. The 2176091-2 provides the highest power rating and tightest tolerance at potentially lower cost. The ERA-6AEB59R0V is specified for automotive applications requiring AEC-Q200 certification.